2007 Mazda Bongo

Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear half shaft sill slightly leaking

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear brake back plate carroded

general underbody corrosion

Brake hose has slight corrosion to ferrule all of them will need to be changed soon as you can (1.1.12 (f) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Front binding a little and needs to be looked at

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

front and rear chassis corroded

front and rear sub frame corroded

front wipers in poor condition

inner sills in poor condition

nearside and offside front inner wheel arches corroded

Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member (5.3.6 (a) (i))

Horn not working (7.7 (a) (ii))

Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Power steering component leaking at steering rack (2.1.5 (a))

Windscreen washer not working (3.5 (a))

Offside Rear Brake pipe connection leaking on a hydraulic braking system (1.1.11 (b) (ii)) DANGEROUS

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

front and rear chassis corroded

front and rear sub frame corroded

inner sills in poor condition

nearside front inner sill corroded but not within prescribed area

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Power steering component has slight seepage from a component (2.1.5 (a))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Position lamp not working (4.2.1 (a))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Power steering component has slight seepage from a component (2.1.5 (a))

Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Nearside Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)

Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Power steering component(s) leaking Steering rack (2.3.3b)

Registration plate lamp not working (1.1.C.1d)

Offside Rear fog lamp not working (1.3.2b)

Tyre has a cut in excess of the requirements deep enough to reach the ply or cords Both Front (4.1.D.1a)

Windscreen wiper does not clear the windscreen effectively both (8.2.2)

inner and outer sills slight corrosion

Nearside Front Shock absorber has a light misting of oil and offside (2.7.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Shock absorber has a light misting of oil and offside (2.7.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

all springs rusty

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Brake pipe slightly corroded (3.6.B.2c)

all springs rusty