2004 Yamaha Yz

No lights for the time test

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Rear Wheel spoke slightly loose (5.2.2 (d))

Shock absorber has a light misting of oil (5.3.2 (b))

Steering headbearing has slight free play (2.2.2 (f) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake disc worn, pitted or scored, but not seriously weakened border line pass (1.1.14 (a) (ii))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Headlamp aim so that beam "kick up" is not visible on the screen bulb may need locating properly (4.1.2 (a))

Headlamp aim too high (4.1.2 (a))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Brake effort inadequate at a wheel (1.2.1 (a) (i))

Rear Brake pedal has insufficient reserve travel (1.1.2 (a))

Rear Rear reflector missing reflective tape not allowed (4.8.2 (a) (ii))

Rear Stop lamp not working (4.3.1 (a) (ii))

Rear Suspension arm pin or bush excessively worn swing arm (5.3.4 (a) (i))

Rear Tyre is unsuitable marked not for highway use . (5.2.3 (a))

Rear Wheel bearing has excessive play spindle loose (5.1.3 (a) (i))

Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Rear Wheel spindle locking device ineffective (5.2.1 (d))

Rear Wheel spindle loose (5.2.1 (c) (i))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Wheel alignment incorrect which adversely affects the handling (2.4 (a))

Rear Brake pedal so insecure that the brake cannot be readily applied (1.1.2 (e) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Steering headbearing has slight free play (2.2.2 (f) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened border line pass (1.1.14 (a) (ii))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Brake lever insecure adjusting bolt insecure (1.1.2 (e) (i))

Front Wheel excessively distorted (5.2.2 (c) (i))

Front Wheel spindle locking device ineffective 4 WHEEL SPINDLE BOLTS LOOSE (5.2.1 (d))

Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Rear Registration plate does not conform to the specified requirements (0.1 (d))

Rear Wheel alignment incorrect which adversely affects the steering (2.4 (a))

Rear Wheel excessively distorted (5.2.2 (c) (i))

Throttle control functioning such that safe operation of the motorcycle is adversely affected when moved from left to right ,engine revs increase (6.2.7 (a) (ii)) DANGEROUS

Exhaust noisy (8.1.1 (a))

Front wheel bearings have slight free play (2.3.5b)

Rear Lower Rear suspension bush has excessive free play shock absorber bush (2.4.A2a(i))

Front wheel bearings have slight free play (2.3.5b)

Rear reflector on motorcycle missing (1.4.1)