2009 Derbi Senda (restricted)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Lower Rear shock absorber insecurely mounted bolt not coming through lock nut (2.4.A.3b)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Rear Brake component defective due to a deliberate modification which significantly reduces the original strength Top bolt missing from master cylinder (3.1.5)

Rear Brake component leaking fluid master cylinder (3.2.B4)

Rear Brake hose leaking fluid From under hose clamp (3.2.B4)

Rear reflector on motorcycle missing (1.4.1)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Rear wheel bearings have excessive free play (2.4.A.2c)

Stop lamp remains on when the brake is released (1.3.1e)

Throttle has a significant change in engine speed whilst moving the steering from lock to lock (2.1.4)

Rear Brake component has an inadequate repair Incorrect brake pad pin fitted (3.1.5) DANGEROUS

Clutch lever shortened. (6.2.1g)

Exhaust noisy (7.1.2)

Brake pedal has inadequate reserve travel (3.1.3b)

Front Roller brake test indicates a binding brake (3.3.A1a)

Horn not loud enough to be heard by another road user (1.7.3a)

Rear Rear wheel spindle securing nut locking device missing (2.4.A.2b)

Rear wheel bearings have excessive free play (2.4.A.2c)

Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Front Wheel spoke excessively loose (4.2.1b)

Horn not loud enough to be heard by another road user (1.7.3a)

Rear Brake disc(s) excessively scored (3.2.A1l)

Rear Brake pad(s) contaminated by oil or grease (3.2.A1k)

Rear Brake pedal has inadequate reserve travel (3.1.3b)

Rear reflector on motorcycle missing (1.4.1)