1995 Mazda Bongo

Suspension component mounting prescribed area is corroded but not considered excessive both floors, chassis rails, under sills, outer sills, inner flitches and cross members (5.3.6 (a) (i))

Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Tyre worn close to legal limit/worn on edge both front (5.2.3 (e))

Nearside Front Suspension component mounting prescribed area is inadequately repaired under sill (5.3.6 (a) (i))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced front / centre outer sill (7.1.1 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner flitch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Rear fog lamp missing (4.5.1 (a) (ii))

Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Prop shaft joint excessively worn rear shaft rear u j (6.1.7 (c) (i))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both front inner flitches (5.3.6 (a) (i))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both rear under sills (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive both floors, chassis rails, under sills, outer sills, inner flitches and cross members (5.3.6 (a) (i))

Tyre worn close to legal limit/worn on edge both front (5.2.3 (e))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Suspension component mounting prescribed area is corroded but not considered excessive both floors, chassis rails, under sills, outer sills, inner flitches and cross members (5.3.6 (a) (i))

Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

rear cross member corroded but not in prescribed area

Oil leak, but not excessive (8.4.1 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive both floors, chassis rails, under sills, outer sills, inner flitches and cross members (5.3.6 (a) (i))

Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Anti-roll bar pin or bush excessively worn both front (5.3.4 (a) (i))

Nearside Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced front / cenrtre under sill (7.1.1 (a) (i))

Nearside Suspension component mounting prescribed area is inadequately repaired centre / rear chassis rail out rigger (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail outrigger (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is inadequately repaired inner flitch (5.3.6 (a) (i))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill badly in several places (5.3.6 (a) (i))

Power steering pipe/hose leaking (2.1.5 (a))

Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member in several places (5.3.6 (a) (i))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both rear inner flitches (5.3.6 (a) (i))

Suspension component mounting prescribed area is inadequately repaired both rear inner flitches (5.3.6 (a) (i))

Fluid leaking continuously posing a serious risk to road safety power steering (8.4.1 (a) (ii)) DANGEROUS

Oil leak, but not excessive (8.4.1 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive both floors, chassis rails, under sills, outer sills, inner flitches and cross members (5.3.6 (a) (i))

Electrical wiring inadequately secured Both fuse boxes next to offside battery insecure (4.11 (a) (i))

Offside Battery insecure but not likely to fall from carrier Battery tray/carrier corroded (4.13 (a) (i))

Exhaust has a major leak of exhaust gases Front exhaust pipe (6.1.2 (a))

Nearside Headlamp light intensity severely reduced (4.1.4 (a))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Rear fog lamp not working (4.5.1 (a) (ii))

Electrical wiring inadequately secured Both fuse boxes next to offside battery insecure (4.11 (a) (i))

Offside Battery insecure but not likely to fall from carrier Battery tray/carrier corroded (4.13 (a) (i))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

o/s inner & outer sill corroded in places

undersealed underneath

Nearside Rear Anti-roll bar attachment bracket/mounting insecure (5.3.3 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Service brake efficiency below requirements (1.2.2 (a) (i))

Offside Front tyre worn on the outer edge

Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Steering rack gaiter split (2.2.D.2d)

Offside Stop lamp not working (1.2.1b)

Offside Front tyre worn on the outer edge

Front X member corroded rad held in by front bumper STRONGLY ADVISE EARLY REPAIR

Offside Rear Seat belt flexible stalk deteriorated but not likely to lead to failure under load (5.2.4a)

Offside Rear nail in tyre

Offside Rear Lower Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Offside Rear fog lamp not working (1.3.2b)

Offside Rear Seat belt flexible stalk deteriorated but not likely to lead to failure under load (5.2.4a)

Offside Rear nail in tyre

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Oil leak

Nearside Inner Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Offside Rear Lower Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Nearside Inner Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Oil leak

front crossmember slightly corroded

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Rear fog lamp insecure (1.3.2a)

coolant leak around engine block

front crossmember slightly corroded

keep wear on n/s front tyre under observation

front bottom ball joints are worn & only meet requirements they should be replaced now

slight bind in rear brakes

Both o/s and n/s track rod ends, dust covers split.

Both o/s/f and n/s/f lower ball joint dust covers split.

Nail in offside front tyre

Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

All position lamps not working (1.1.A.3b)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear fog lamp not working (1.3.2b)

Rear fog lamp tell tale not working (1.3.1b)

Offside Rear Anti-roll bar attachment bracket/mounting fractured (2.4.G.1)

Suspension joint offside lower dust cover split/missing

Suspension joint offside lower dust cover split/missing