MOT Status
ExpiredMileage
350,596 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL (6.1.1 (c) (i))
Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL (6.1.1 (c) (i))
Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL (6.1.1 (c) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))
Offside Front Macpherson strut top bush or bearing has excessive wear or free play (5.3.4 (a) (i))
Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear fog lamp not working (4.5.1 (a) (ii))
Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Rear Rear fog lamp not working (4.5.1 (a) (ii))
Rear Vehicle structure has slight corrosion under side (6.1.B.2)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Rear Body has slight corrosion vehicle under side (6.1.B.2)
Tyre worn close to the legal limit both rears (4.1.E.1)
Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)
Nearside Rear Suspension arm synthetic bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)
Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill in 2 places (6.1.B.2)
Nearside Rear Upper Seat belt anchorage prescribed area is excessively corroded inner wheel arch (5.2.6)
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings quater panel (6.1.B.2)
Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill in 2 places (6.1.B.2)
Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch (6.1.B.2)
Offside Rear Upper Seat belt anchorage prescribed area is excessively corroded inner wheel arch (5.2.6)
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings quater panel (6.1.B.2)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Vehicle structure has slight corrosion vallance (6.1.B.2)
oil leak
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Shock absorber has a serious fluid leak (2.7.3)
Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)
Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Inner Rear Anti-roll bar attachment bracket/mounting fractured (2.4.G.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Parking brake lever has little reserve travel (3.1.6b)
Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Offside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Offside Front Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Nearside Inner Vehicle structure has slight corrosion (6.1.B.2)
Offside Inner Vehicle structure has slight corrosion (6.1.B.2)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear Anti-roll bar attachment bracket/mounting fractured (2.4.G.1)
Offside Rear fog lamp not working (1.3.2b)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc slightly scored (3.5.1h)
Nail in offside front tyre
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Front brake disc slightly scored (3.5.1h)
Nail in offside front tyre
Rear brake disc slightly pitted (3.5.1h)
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
N880 XFJ is a 2004 Mazda Bongo in Silver with a 2,490cc diesel engine. This vehicle has been through 29 MOT tests with a personal pass rate of 62.1%.
Across all 2004 Mazda Bongo models, the average MOT pass rate is 66.5% with a typical mileage of 134,910 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying N880 XFJ, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 22 years old, this Mazda Bongo is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of N880 XFJ?
You can check the full history of N880 XFJ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was N880 XFJ registered?
N880 XFJ is a 2004 Mazda Bongo, first registered on 1 June 2004.
Is N880 XFJ safe to buy?
The MOT history for N880 XFJ shows 29 tests with a 62.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does N880 XFJ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on N880 XFJ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.