MOT Status
ValidMileage
224,367 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Engine mounting damaged but not to excess worn (6.1.8 (a) (i))
Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security outrigger (6.2.2 (d) (i))
Nearside Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security floor panel (6.2.2 (d) (i))
Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security inner wheel arch (6.2.2 (d) (i))
Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security outrigger (6.2.2 (d) (i))
offside and nearside sills corroded
Exhaust has a minor leak of exhaust gases Mid and back box (6.1.2 (a))
Nearside Rear Crossmember corroded but not prescribed area
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Exhaust has a minor leak of exhaust gases Mid and back box (6.1.2 (a))
Front Windscreen wiper does not clear the windscreen effectively Both front (3.4 (b) (ii))
Nearside Rear Crossmember corroded but not prescribed area
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Obligatory mirror seriously damaged, affecting the rear view (3.3 (b) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Vehicle structure is corroded but structural rigidity is not significantly reduced general underbody corrosion (6.1.1 (c) (i))
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing (6.1.1 (c) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Vehicle structure is corroded but structural rigidity is not significantly reduced general underbody corrosion (6.1.1 (c) (i))
Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced wheel arch (6.1.1 (c) (i))
Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced wheel arch (6.1.1 (c) (i))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Brake pipe excessively corroded (1.1.11 (c))
Nearside Front Service brake effort inadequate at a wheel (1.2.1 (a) (i))
Nearside Front Service brake excessively binding (1.2.1 (f))
Nearside Headlamp light intensity severely reduced (4.1.4 (a))
Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))
Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
General corrosion on vehicle underside & running gear
Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Nearside Side repeater not working (4.4.1 (a) (ii))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Rear Nail in tyre ()
Offside rear lamp cluster damaged
Oil leak, but not excessive (8.4.1 (a) (i))
Rear exhaust slightly blowing, general corrosion on vehicle underside & running gear
Nearside Lower Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Inner Subframe mounting prescribed area is excessively corroded sill/chassis (2.4.A.3)
Offside Front Inner Subframe mounting prescribed area is excessively corroded sill/chassis (2.4.A.3)
Offside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)
Offside Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Rear fog lamp not working (1.3.2b)
Nearside Lower Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Centre coolant leak
Nearside Front Front constant velocity joint gaiter damaged, but preventing the ingress of dirt outer (2.5.C.1a)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Stop lamp not working (1.2.1b)
Offside Front Headlamp adversely affected by the operation of another lamp (1.7.5c)
Offside Rear Outer Suspension spring mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Rear Registration plate lamp does not illuminate simultaneously with the position lamps (1.1.C.1a)
Centre coolant leak
Nearside Front Front constant velocity joint gaiter damaged, but preventing the ingress of dirt outer (2.5.C.1a)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)
Rear fog lamp not working (1.3.2b)
Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Coolant leak
Nearside Front Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)
Oil leak
Under-trays fitted obscuring some underside components
both rear wheel arches corroded
Nearside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Nearside Stop lamp not working (1.2.1b)
Offside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Coolant leak
Nearside Front Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)
Oil leak
Under-trays fitted obscuring some underside components
both rear wheel arches corroded
Front Brake pad(s) wearing thin (3.5.1g)
Rear Brake pad(s) wearing thin (3.5.1g)
Centre Upper Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Tyre has ply or cords exposed (4.1.D.1b)
Offside Lower Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone 'A' (8.3.1b)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear Brake pad(s) wearing thin (3.5.1g)
Front Body has slight corrosion (6.1.B.2)
Rear Body has slight corrosion (6.1.B.2)
Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear fog lamp not working (1.3.2b)
Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Front Body has slight corrosion (6.1.B.2)
Rear Body has slight corrosion (6.1.B.2)
Nearside Stop lamp not working (1.2.1b)
Rear Body has a sharp edge caused by corrosion (6.1.C.1)
Vehicle structure has slight corrosion (6.1.A.1)
Vehicle structure has slight corrosion (6.1.B.2)
Body has slight corrosion (6.1.B.2)
Front Brake pad(s) wearing thin (3.5.1g)
Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Nearside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Offside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Power steering component(s) leaking (2.3.3b)
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
N804 NBV is a 1995 Mazda Bongo in Silver with a 2,500cc diesel engine. This vehicle has been through 31 MOT tests with a personal pass rate of 58.1%.
Across all 1995 Mazda Bongo models, the average MOT pass rate is 64.5% with a typical mileage of 135,909 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying N804 NBV, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 31 years old, this Mazda Bongo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of N804 NBV?
You can check the full history of N804 NBV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was N804 NBV registered?
N804 NBV is a 1995 Mazda Bongo, first registered on 31 December 1995.
Is N804 NBV safe to buy?
The MOT history for N804 NBV shows 31 tests with a 58.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does N804 NBV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on N804 NBV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.