1996 Honda NTV650

Front Shock absorber has a light misting of oil both forks, will need doing soon (5.3.2 (b))

Position lamp light intensity obviously reduced 2 bulb unit, one failed (4.2.3 (a) (i))

Rear tyre still legal, but starting to crack on inside of tread pattern

Front Tyre worn close to the legal limit worn on offside near limit (5.2.3 (e))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Nearside Rear Direction indicator insecure loose fitting (4.4.1 (c) (i))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Position lamp not working (4.2.1 (a))

Nearside Rear Direction indicator insecure loose fitting (4.4.1 (c) (i))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Shock absorber has a light misting of oil both forks weeping and dust covers expanded from inside (rust) (5.3.2 (b))

Front Tyre worn close to the legal limit one side of tyre slightly worn more than other side (5.2.3 (e))

Rear Footrest slightly loose pillion footrests worn on pivot pin (6.2.12 (a))

Central Front Position lamp not working broken wire (4.2.1 (a))

Offside Rear Position lamp not working blown bulb (4.2.1 (a))

Front Brake caliper corroded but not seriously weakened dirty corroded casing, needs checking to avoid damage, slight squeal on backwards pushing only (1.1.16 (d) (i))

Front Shock absorber has a light misting of oil both weeping fork seals (5.3.2 (b))

Front shock absorber has light misting of stanchion both legs (2.3.3)

Front shock absorber has light misting of stanchion both legs (2.3.3)

Nearside Front Direction indicator not working (1.5.1c)

Stop lamp does not illuminate immediately a brake applies front brake switch, replaced (1.3.1a)

Front Exhaust is leaking but is not excessively noisey (7.1.1b)

Nearside rear engine cover insecure

Oil leak

Radiator upper mounting corroded. Radiator insecure

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Rear shock absorber seal failed and leaking oil (2.4.A.1c)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))