2004 Mazda Bongo

Brake disc worn, pitted or scored, but not seriously weakened all 4 (1.1.14 (a) (ii))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Inner Suspension component mounting repair covered in underseal sill (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Inner Suspension component mounting repair covered in underseal sill (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Brake disc worn, pitted or scored, but not seriously weakened all 4 (1.1.14 (a) (ii))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated rubber perishing (5.3.4 (b) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (undersealed) (6.1.1 (c) (i))

Nearside Rear Outer Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated rubber perishing (5.3.4 (b) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (undersealed) (6.1.1 (c) (i))

Offside Rear Outer Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Driver's door catch deteriorated but the door can still be readily opened and closed (6.2.3 (c) (i))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))

Offside Rear Inner Suspension component mounting prescribed area damaged but not considered excessive sill (5.3.6 (a) (i))

Offside Front Driver's door catch deteriorated but the door can still be readily opened and closed (6.2.B.2)

Offside Front Driver's door catch deteriorated but the door can still be readily opened and closed (6.2.B.2)

Offside Front Headlamp aim too low (1.8)

Driver's door catch deteriorated but the door can still be readily opened and closed (6.2.B.2)

Headlamp deteriorated but light output not reduced (1.7.5a)

underseal underside of vehicle

Nearside Side repeater not working (1.4.A.2c)

Offside Side repeater not working (1.4.A.2c)

Rear fog lamp not working (1.3.2b)

Nearside Rear Lower Shock absorber has a slightly worn bush (2.7.4)

Offside Body has slight corrosion (6.1.B.2)

Offside Rear Lower Shock absorber has a slightly worn bush (2.7.4)

Offside Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Rear seats fitted as rear facing

Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Lower Shock absorber has a slightly worn bush (2.7.4)

Offside Body has slight corrosion (6.1.B.2)

Offside Rear Lower Shock absorber has a slightly worn bush (2.7.4)

Offside Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Rear seats fitted as rear facing

Offside Rear Body has slight corrosion (6.1.B.2)

Oil leak

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Oil leak

Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)