1995 Mazda Bongo

Emissions not tested due to radiator leaking (8.2.2.2 (e))

Nearside Front Body component corroded and likely to cause injury wheel arch (6.2.1 (a) (i))

Nearside Front Brake pipe excessively corroded (1.1.11 (c))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rigger (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rigger (5.3.6 (a) (i))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))

Registration plate deteriorated but not likely to be misread both (0.1 (b))

holes in n/s/f inner sill out side prescribed area

holes in o/s/f inner sill outside prescribed area in 2 areas

radiator leaking and mounts missing making it insecure

rear of vehicle is corroded

Nearside Rear Anti-roll bar has excessive play in a pin/bush rear D bush (2.4.G.2)

Offside Front Suspension component mounting prescribed area is excessively corroded nr crossmember. (2.4.A.3)

Offside Rear Anti-roll bar has excessive play in a pin/bush rear D bush. (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded nr axle mounting. (2.4.A.3)

coolant radiator leaking and insecure due to corroded off mountings.

vehicle has severe corrosion outside of prescribed areas.

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

o/s inner sill holed but outside a prescribed area

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Body has a sharp edge caused by damage light lens (6.1.C.1)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Body has a projection caused by corrosion bumper (6.1.C.1)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

o/s inner sill holed but outside a prescribed area

Front Brake pad(s) wearing thin (3.5.1g)

several areas of corrosion underside outside presceribed areas.

several previous chassis repairs heavily undersealed.

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Body has a sharp edge caused by damage (6.1.C.1)

Offside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS

Offside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g) DANGEROUS

several areas of corrosion underside outside presceribed areas.

several previous chassis repairs heavily undersealed.

o/s rack boot twisted,n/s & o/s front tyres worn unevenly,o/s strut top corroded.front brake pipes corroded,vehicle excessively corroded.

Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Headlamp aim too low (1.8)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

o/s rack boot twisted,n/s & o/s front tyres worn unevenly,o/s strut top corroded.front brake pipes corroded,vehicle excessively corroded.

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Rear Body has slight corrosion (6.1.B.2)

Rear Vehicle structure has slight corrosion (6.1.A.1)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Upper Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Lower Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Upper Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Rear An item not tested (Manual)

Rear fog lamp not working (1.3.2b)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Lower Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Body has a sharp edge caused by corrosion (6.1.C.1)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Rear Body has a sharp edge caused by corrosion (6.1.C.1)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Stop lamp not working (1.2.1b)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Registration plate lamp not working (1.1.5c)

Offside Windscreen wiper blade deteriorated (8.2.2)

Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Rear fog lamp emits a light other than red (1.3.2e)

Offside Rear fog lamp insecure (1.3.2a)