1996 Honda NTV650

Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Front Brake lever cannot be applied smoothly (3.1.3d)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Offside Footrest insecure footrest hanger (6.2.1a)

Wheel alignment incorrect which adversely affects the steering (2.5.1)

Front Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k) DANGEROUS

Front Brake pad(s) contaminated by oil or grease (3.2.A1k) DANGEROUS

riders o/s footrest cracked on mount

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Direction indicator insecure (1.5.3b)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Offside Front Direction indicator not working (1.5.1c)

Throttle operating incorrectly (6.2.1f)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Exhaust is leaking and excessively noisey (7.1.1b)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Tyre valve stem damaged which could cause sudden tyre deflation (4.1.2c)

Rear Tyre valve stem damaged which could cause sudden tyre deflation (4.1.2c)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Tyre valve stem slightly damaged (4.1.2c)

front indicator condition

handle bar condition

rear brake switch operation

silencer condition

Front Tyre valve stem damaged which could cause sudden tyre deflation (4.1.2c)

Front shock absorber seal failed and leaking oil (2.3.3)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

front sidelight operation

silencer condition

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Nearside Front Front shock absorber seal failed and leaking oil (2.3.3)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear position lamp deteriorated and function impaired (1.1.1b)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))