MOT Status
ValidMileage
231,098 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Steering rack gaiter damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Steering rack gaiter damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Rear fog lamp not working (4.5.1 (a) (ii))
Front Tyre worn close to legal limit/worn on edge both on inner edges (5.2.3 (e))
Central Oil leak ()
Offside Front Power steering component(s) has slight seepage from a component (2.3.3b)
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Offside Front Headlamp not working on dipped beam (1.7.5a)
Offside Rear Rear fog lamp not working (1.3.2b)
Central Oil leak ()
Offside Front Power steering component(s) has slight seepage from a component (2.3.3b)
Items removed from driver's view prior to test ()
Driver's seat insecure (6.2.A.1)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seal (6.1.B.2)
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings next to the radiator (6.1.B.2)
Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings next to exhaust (6.1.B.2)
Nearside Stop lamp not working (1.2.1b)
Offside Front Headlamp not working on dipped beam (1.7.5a)
Offside Front Headlamp not working on main beam (1.7.5a)
Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seal (6.1.B.2)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear bush (2.4.G.2)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings next to the radiator (6.1.B.2)
Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing (6.1.B.2)
Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing (6.1.B.2)
Rear Exhaust has a major leak of exhaust gases box (7.1.2)
Rear Rear fog lamp not working (1.3.2b)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre has puncher
Offside Front Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)
Rear Brake pad(s) wearing thin (3.5.1g)
Driver's seat insecure (6.2.A.1)
Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seal (6.1.B.2)
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings next to the radiator (6.1.B.2)
Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seal (6.1.B.2)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear bush (2.4.G.2)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings next to the radiator (6.1.B.2)
Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing (6.1.B.2)
Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing (6.1.B.2)
Rear Exhaust has a major leak of exhaust gases box (7.1.2)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre has puncher
Offside Front Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear Disc pads wearing low
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement front and rear bushes on arm (2.4.G.2)
Offside Headlamp not working on dipped beam (1.7.5a)
Rear fog lamp not working (1.3.2b)
Rear Disc pads wearing low
Engine covers fitted obscuring some components in the engine bay
Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Shock absorber has a light misting of oil (2.7.3)
Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Under-trays fitted obscuring some underside components
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Rear fog lamp not working (1.3.2b)
Engine covers fitted obscuring some components in the engine bay
Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Shock absorber has a light misting of oil (2.7.3)
Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Under-trays fitted obscuring some underside components
Body heavily concealed by tape
Coolant leak
Corrosion to offside outer sill
Corrosion to offside rear inner sill, close to excessive
Corrosion to rear chassis and wheel arches
Heavy corrosion and holes to both inner sills
Heavy corrosion and holes to nearside outer sill
Nearside front outer C/V gaiter leaking grease
Nearside rear quarter panel appears to be peeling away
Rear brake hose ferrules corroded
Fuel system component leaking (7.2.3)
Nearside Rear Body has a sharp edge caused by corrosion (6.1.C.1)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Stop lamp not working (1.2.1b)
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Windscreen washer provides insufficient washer liquid (8.2.3)
Body heavily concealed by tape
Coolant leak
Corrosion to offside outer sill
Corrosion to offside rear inner sill, close to excessive
Corrosion to rear chassis and wheel arches
Heavy corrosion and holes to both inner sills
Heavy corrosion and holes to nearside outer sill
Nearside front outer C/V gaiter leaking grease
Nearside rear quarter panel appears to be peeling away
Rear brake hose ferrules corroded
Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
heavy corrosion and holes to nearside inner and outer sill outside prescribed areas
heavy corrosion to offside inner sill outside prescribed areas
rear wheel arches taped up to cover sharp edges
slight corrosion to offside rear inner wheel arch
Nearside Rear Body has a sharp edge caused by corrosion (6.1.C.1)
Offside Rear Body has a sharp edge caused by corrosion (6.1.C.1)
Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
heavy corrosion and holes to nearside inner and outer sill outside prescribed areas
heavy corrosion to offside inner sill outside prescribed areas
slight corrosion to offside rear inner wheel arch
Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
corrosion to both rear outer wheel arches
corrosion to offside front outer wheel arch
corrosion to offside rear outer sill
corrosion to rear chassis rails on both sides
heavy corrosion to both centre inner sills
heavy corrosion to nearside centre outer sill outerside perscribed area
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Headlamp not working on main beam (1.7.5a)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
corrosion to both rear outer wheel arches
corrosion to offside front outer wheel arch
corrosion to offside rear outer sill
corrosion to rear chassis rails on both sides
heavy corrosion to both centre inner sills
heavy corrosion to nearside centre outer sill outerside perscribed area
Temporary fuel cap fitted
rear crossmember corroded offside
vehicle body in poor condition (corrosion)
Front registration plate missing (6.3.1a)
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Headlamp aim not tested (1.8.A.1c)
Nearside Headlamp not working on dipped beam (1.7.5a)
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Headlamp not working on main beam (1.7.5a)
Offside Rear Anti-roll bar attachment bracket/mounting insecure (2.4.G.1)
Rear fog lamp emits a light other than red (1.3.2e)
Temporary fuel cap fitted
body work in poor condition
excessive corrosion of rear crossmember
Nearside Inner Front Body has slight corrosion (6.1.B.2)
rear crossmember has corrosion nearside
Nearside Headlamp aim too low (1.8)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Headlamp aim too low (1.8)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Nearside Headlamp aim beam image kick up to the offside (1.8)
Nearside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Offside Headlamp aim beam image kick up to the offside (1.8)
Offside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Offside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Offside Rear fog lamp missing (1.3.2a)
Rear fog lamp switch missing (1.3.1a)
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
N482 RAP is a 1995 Mazda Bongo in Black with a 2,490cc diesel engine. This vehicle has been through 28 MOT tests with a personal pass rate of 57.1%.
Across all 1995 Mazda Bongo models, the average MOT pass rate is 64.5% with a typical mileage of 135,909 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying N482 RAP, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 31 years old, this Mazda Bongo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of N482 RAP?
You can check the full history of N482 RAP by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was N482 RAP registered?
N482 RAP is a 1995 Mazda Bongo, first registered on 31 December 1995.
Is N482 RAP safe to buy?
The MOT history for N482 RAP shows 28 tests with a 57.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does N482 RAP have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on N482 RAP. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.