1995 Mazda Bongo

Very heavily corroded to the underside, various repairs and patches.

Nearside Battery insecure (1.9.1)

Nearside Front Lower Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Front Body has a sharp edge caused by corrosion O/S/F A pillar (6.1.C.1)

Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front A pillar corroded

Offside Front cv gaitor damaged

clutch slave cylinder leaking

corrosion on o/s/r wheel arch

oil leak

Nearside Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner sill (6.1.B.2)

Nearside Front Brake pipe leaking (3.6.A.1)

Offside Rear Body has a sharp edge caused by corrosion wheel arch (6.1.C.1)

Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill (6.1.B.2)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Exhaust system not adequately supported (7.1.1)

Offside Front Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

clutch slave cylinder leaking

o/s/f a pillar corroded

oil leak

rear body corroded

Engine covers fitted obscuring some components in the engine bay

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Under-trays fitted obscuring some underside components

corrosion

Centre Stop lamp has a product on the light source so it is not visible from a reasonable distance (1.2.1d)

Horn not working (1.6.2a)

Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Offside Headlamp not working on main beam (1.7.5a)

Offside Rear Body insecure and dangerous to other road users (6.1.B.1b)

Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Parking brake lever has no reserve travel (3.1.6b)

Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone 'A' (8.3.1b)

Engine covers fitted obscuring some components in the engine bay

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Under-trays fitted obscuring some underside components

corrosion

Brake pipe slightly corroded (3.6.B.2c)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Parking brake lever has little reserve travel (3.1.6b)

chassis corroded

floors corroded

suspension corroded

Horn not loud enough to be heard by another road user (1.6.2b)

Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Upper Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone 'A' (8.3.1b)

passenger door cannot be opened from outside the vehicle (6.2.B.1c)

Brake pipe slightly corroded (3.6.B.2c)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Parking brake lever has little reserve travel (3.1.6b)

chassis corroded

floors corroded

suspension corroded

Vehicle has loads of corrosion to underside

All position lamps not working (1.1.A.3b)

Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Rear fog lamp not working (1.3.2b)

Vehicle has loads of corrosion to underside

Brake pedal spongy (3.3.B.1b)

Front Front position lamp(s) not working (1.1.A.3b)

Horn not working (1.6.2a)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Rear Rear fog lamp not working (1.3.2b)

Rear Rear position lamp(s) not working (1.1.A.3b)

Service brake: efficiency below requirements (3.7.C.1a) DANGEROUS

Nearside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Rear brake disc slightly pitted (3.5.1h)

vehicle has alot of surface corrosion to underside

Brake pedal creeps down when held under pressure (3.3.B.1a)

Brake pedal creeps down under servo assistance and touches the floor (3.3.C.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

front tyres 215/65/15 rear tyres 195/70/15

Exhaust mounting missing (7.1.1b)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Shock absorber has slight external damage to the casing (2.7.2a)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)