MOT Status
ValidMileage
220,030 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))
Front Oil leak, but not excessive (8.4.1 (a) (i))
Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt both (2.1.3 (g) (i))
Front Windscreen wiper blade defective both (3.4 (b) (i))
Rear Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security bumper (6.2.2 (d) (i))
Nearside Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting all (6.2.2 (d) (i))
Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength all (5.3.6 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))
Front Oil leak, but not excessive (8.4.1 (a) (i))
Front Road wheel fixing missing both (5.2.1 (a) (i))
Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt both (2.1.3 (g) (i))
Front Windscreen wiper blade defective both (3.4 (b) (i))
Rear Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security bumper (6.2.2 (d) (i))
Brake performance unable to be tested near side front pads down to metal (1.2.1 (g))
Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Nearside Rear Suspension arm corroded and seriously weakened out rigger (5.3.3 (b) (i))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Offside Rear Brake disc contaminated (1.1.14 (b))
Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member (6.1.1 (c) (i))
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
both outer and inner sills corroded
Nearside Inner sill corroded
Nearside Outer sill corroded
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Front Registration plate does not conform to the specified requirements (0.1 (d))
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Rear Registration plate does not conform to the specified requirements 8 and R to close (0.1 (d))
Nearside Inner sill corroded
Nearside Outer sill corroded
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge worn off on edge and cracking (5.2.3 (e))
Emissions not tested to dirty (8.2.2.2 (e))
Front Registration plate does not conform to the specified requirements (0.1 (d))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))
Offside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Power steering component leaking rack (2.1.5 (a))
Rear Registration plate does not conform to the specified requirements (0.1 (d))
Rear fog lamp missing (4.5.1 (a) (ii))
Rear fog lamp switch missing (4.5.3 (a))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge worn off on edge and cracking (5.2.3 (e))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i))
Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i))
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting corner outrigger (6.2.2 (d) (i))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i))
Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
n/s and o/s inner drop sills corroded out side precribed areas
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Windscreen washer provides insufficient washer liquid (8.2.3)
Front Brake pad(s) wearing thin (3.5.1g)
Offside Ball joint has slight play (2.2.B.1f)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Exhaust has part of the system excessively deteriorated (7.1.1a)
Offside Rear fog lamp emits a light other than red (1.3.2e)
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
N327 SVY is a 1995 Mazda Bongo in Blue with a 2,500cc diesel engine. This vehicle has been through 24 MOT tests with a personal pass rate of 66.7%.
Across all 1995 Mazda Bongo models, the average MOT pass rate is 64.5% with a typical mileage of 135,909 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying N327 SVY, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 31 years old, this Mazda Bongo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of N327 SVY?
You can check the full history of N327 SVY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was N327 SVY registered?
N327 SVY is a 1995 Mazda Bongo, first registered on 31 December 1995.
Is N327 SVY safe to buy?
The MOT history for N327 SVY shows 24 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does N327 SVY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on N327 SVY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.