1996 Mazda Motor Caravan

Central Front Sub-frame corroded but not seriously weakened complete front subframe corroded not holed at time of test (5.3.3 (b) (i))

Nearside Front Upper Macpherson strut mounting corroded but not seriously weakened upper prescribed area corroded but not holed at time of test (5.3.3 (b) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Upper Macpherson strut mounting corroded but not seriously weakened upper prescribed area corroded but not holed at time of test (5.3.3 (b) (i))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced the rear of the vehicle has deep corrosion (6.1.1 (c) (i))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Inner Suspension component mounting prescribed area fractured significantly reducing structural strength inner upper wheel arch holed in 2 places (5.3.6 (a) (i))

Nearside Rear Inner Integral body structure is fractured and structural rigidity is significantly reduced inner rear upper wheel area holed (6.1.1 (a) (i))

Nearside Rear Upper Vehicle structure is fractured and structural rigidity is significantly reduced toe bar prescribed area hole marked yellow (6.1.1 (a) (i))

Offside Front Battery insecure and likely to cause a short circuit (4.13 (a) (ii))

Offside Front Battery insecure and likely to fall from carrier battery tray holed at securing device (4.13 (a) (ii))

Offside Front Inner Suspension component mounting prescribed area fractured significantly reducing structural strength inner wheel arch holed (5.3.6 (a) (i))

Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill hole in place by osf door (7.1.1 (a) (i))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Upper Vehicle structure is fractured and structural rigidity is significantly reduced toe bar prescribed area holed marked yellow (6.1.1 (a) (i))

Central Front Sub-frame corroded but not seriously weakened complete front subframe corroded not holed at time of test (5.3.3 (b) (i))

Nearside Front Upper Macpherson strut mounting corroded but not seriously weakened upper prescribed area corroded but not holed at time of test (5.3.3 (b) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Upper Macpherson strut mounting corroded but not seriously weakened upper prescribed area corroded but not holed at time of test (5.3.3 (b) (i))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced the rear of the vehicle has deep corrosion (6.1.1 (c) (i))

Central Rear Towball/hitch not fitted at time of test ()

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Front Body has slight corrosion (6.1.B.2)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Rear Body has slight corrosion (6.1.B.2)

Exhaust has a major leak of exhaust gases (7.1.2)

Horn not working (1.6.2a)

Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Anti-roll bar attachment bracket/mounting fractured (2.4.G.1)

Items removed from driver's view prior to test

Nearside Front position lamp(s) deteriorated, but still visible from a reasonable distance (1.1.A.3d)

Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

Tow ball/hitch not fitted at time of test

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

offside headlamp insecure

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Rear coil spring corroded (2.4.C.1b)

Oil leak from gearbox area

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Windscreen washer provides insufficient washer liquid (8.2.3)

Vehicle structure has slight corrosion (6.1.A.1)

oil leak from gearbox pipes

rear wheel arches corroded

Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Body has a sharp edge caused by corrosion (6.1.C.1)

Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Front Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Nearside Front Anti-roll bar ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Parking brake lever has little reserve travel (3.1.6b)

Nearside Front Anti-roll bar ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Stop lamp not working (1.2.1b)

Parking brake lever has little reserve travel (3.1.6b)

underside corrosion

Suspension joint nearside upper dust cover split/missing

Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Front brake disc excessively pitted (3.5.1h)

Offside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Outer Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Stop lamp not working (1.2.1b)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Stop lamp not working (1.2.1b)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Front constant velocity joint gaiter split (2.5.C.1a)