1995 Harley Davidson XLH1200

All direction indicators removed

Headlamp removed

Number plate lamp removed

Position lamps removed

Stop lamp removed

All direction indicators missing (4.4.1 (a) (ii))

Headlamp aim unable to be tested (4.1.2 (b))

Headlamp missing (4.1.1 (a) (ii))

Rear Position lamp missing (4.2.1 (a))

Stop lamp missing (4.3.1 (a) (ii))

Brake pipe slightly corroded (1.1.11 (c))

Exhaust noisy (8.1.1 (a))

Front Brake pipe inadequately clipped or supported (1.1.11 (d) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Exhaust noisy (8.1.1 (a))

Rear Tyre worn close to the legal limit abnormal wear pattern (5.2.3 (e))

Exhaust noisy (8.1.1 (a))

Front Front tyre perishing on sidewalls

Rear Tyre worn close to the legal limit (5.2.3 (e))

slight oil leak exhaust noisey

Rear Position lamp not working (4.2.1 (a))

Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Stop lamp not working (4.3.1 (a) (ii))

slight oil leak exhaust noisey

Exhaust noisy (7.1.2)

Rear inner brake pad getting low

Exhaust noisy (7.1.2)

Smaller number plate fitted due to vehicle being imported

Exhausts noisey

Smaller number plate fitted due to vehicle being imported

Due to design of bike, slightly smaller than standard number plate fitted

Exhaust noisy (7.1.2)

Front Brake component is slightly corroded (3.1.5)

Headlamp aim too low (1.6)

Nearside Direction indicator not working (1.5.1c)

Nearside Front Brake hose is likely to be fouled or trapped by moving parts (3.2.B2c)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Brake component is slightly corroded (3.1.5)