1996 Audi 80

Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Brake hose has slight corrosion to ferrule all ferrules (1.1.12 (f) (i))

Front Inner Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Front Tyre slightly damaged/cracking or perishing both sides (5.2.3 (d) (ii))

Hydraulic brake calliper corroded but not seriously weakened all callipers (1.1.16 (d) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Rear Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Brake hose has slight corrosion to ferrule all ferrules (1.1.12 (f) (i))

Front Inner Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Front Tyre slightly damaged/cracking or perishing both sides (5.2.3 (d) (ii))

Hydraulic brake calliper corroded but not seriously weakened all callipers (1.1.16 (d) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Rear Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))

Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust system not adequately supported (7.1.1)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Rear Registration plate lamp not working (1.1.5c)

Rear Rear fog lamp not working (1.3.2b)

Exhaust has a minor leak of exhaust gases (7.1.2)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Brakes imbalanced across an axle (3.7.B.5b)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front front brake binding (3.7.B.1)

Fuel system component insecure (7.2.1)

Nearside Front Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Front Headlamp aim too high (1.8)

Nearside Front Shock absorber has an excessively worn shock absorber pivot (2.7.4)

Offside Rear Rear fog lamp not working (1.3.2b)

Rear Exhaust mounting missing (7.1.1b)

Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)