1996 Honda Fireblade

Drive chain slightly loose (6.2.1d)

Milage not shown

Offside Front shock absorber has light misting of stanchion (2.3.3)

Rear wheel bearings are slightly rough (2.4.A.2c)

Rear wheel bearings have slight free play (2.4.A.2c)

Rear brake caliper sliding pins worn

Wheel alignment slightly misaligned. (2.5.1)

Front Brake hose excessively kinked (3.2.B3a)

Front Exhaust is leaking and excessively noisey (7.1.1b)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Brake hose is likely to be fouled or trapped by moving parts (3.2.B2c)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear reflector on motorcycle missing (1.4.1)

Rear brake caliper sliding pins worn

Wheel alignment slightly misaligned. (2.5.1)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear number plate

advised rear pads new need beding in

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear number plate

advised cluch cabel catching

advised front and rear pads getting low

advised front brake fluid low

advised indicator flash quick

advised rear tyre getting low

Front Stop lamp affected by the operation of another lamp (1.3.2)

Front position lamp incorrect colour (1.1.2a)

Offside Headlamp aim too high (1.6)

Rear Brake fluid reservoir fluid level dangerously low (3.2.B1d)

advised cluch cabel catching

advised front and rear pads getting low

advised front brake fluid low

advised indicator flash quick

advised rear tyre getting low

Exhaust noisy (7.1.2)

Slight play in rear wheel bearings

Front Tyre worn close to the legal limit (4.1.3(ii))

Steering headbearing has slight free play (2.2.2)

Drive chain slightly loose (6.2.1d)

Rear Tyre worn close to the legal limit (4.1.3(ii))