1996 Hyundai S Coupe

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Suspension arm corroded and seriously weakened axle (5.3.3 (b) (i))

Offside Front Brake pipe excessively corroded to flexi (1.1.11 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

both rear wheel arches have slight corosion

sill covers fitted

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Suspension arm corroded but not seriously weakened axle arm (5.3.3 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

alloy and steel wheel fitted to same axle

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

Offside Rear Suspension arm corroded and seriously weakened axle arm (5.3.3 (b) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength lower spring cup (5.3.6 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Suspension arm corroded but not seriously weakened axle arm (5.3.3 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

alloy and steel wheel fitted to same axle

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust has a major leak of exhaust gases rear box (6.1.2 (a))

Nearside Rear Suspension arm corroded and seriously weakened axle (5.3.3 (b) (i))

Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Rear Suspension arm corroded and seriously weakened axle (5.3.3 (b) (i))

Offside Windscreen washer provides insufficient washer liquid (3.5 (a))

Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Front Tyre tread depth below requirements of 1.6mm both (4.1.E.1)

Nearside Rear Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength inner arch (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Parking brake lever has no reserve travel (3.1.6b)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Headlamp not working on main beam (1.7.5a)

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

outer plastic side skirts fitted unable to check outer side sills

Offside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Parking brake lever has no reserve travel (3.1.6b)

Suspension joint nearside lower dust cover split/missing

plastic side skirts fitted to outer sills

slight crack in rear bumper

Nearside Shock absorber has a light misting of oil (2.7.3)