2003 Triumph Speed Four

Front wheel bearings are excessively rough (2.3.5b)

Headlamp aim too high (1.6)

Horn not loud enough to be heard by another road user (1.7.3a)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Steering headbearing has excessive free play (2.2.2)

Brake fluid reservoir insecurely mounted (3.2.B1a)

Registration plate with character(s) which are not the correct height (6.3.4a)

Front Front wheel bearings are slightly rough (2.3.5b)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Exhaust noisy (7.1.2)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a) DANGEROUS

Front Front wheel bearings are slightly rough (2.3.5b)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Exhaust noisy (7.1.2)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Drive chain slightly loose (6.2.1d)

Front wheel bearings have excessive free play (2.3.5b) DANGEROUS

Headlamp aim too low (1.6)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear Floor brake test indicates a binding brake (3.3.C2c)

Front shock absorber has light misting of stanchion (2.3.3)

Steering movement slightly 'notchy' (2.2.1a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Tyre worn close to the legal limit (4.1.3(ii))