2014 Piaggio Fly

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Front Shock absorber has a reduced damping effect (5.3.2 (b))

Headlamp reflector slightly defective (4.1.1 (b) (i))

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Suspension arm pin, bush or joint worn but not resulting in excessive movement engine pivot (5.3.4 (a) (i))

glovebox door not locking

horn slightly quiet

mirrors missing

front brake pads very rusty

Front Brake excessively binding (1.2.1 (f))

Horn not working properly (7.7 (a) (i))

front brake pads very rusty

Front Brake binding but not excessively (1.2.1 (f))

Registration plate inscription illegible (0.1 (b))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Brake disc contaminated (1.1.14 (b))

Rear suspension stiff

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

rear suspension makes loud noise when operated needs investigating as cannot see obvious cause

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Tyre worn close to the legal limit (4.1.3(ii))

Headlamp aim too high (1.6)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

rear suspension makes loud noise when operated needs investigating as cannot see obvious cause