1995 Mazda Bongo

Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill/wheel arch (6.2.2 (d) (i))

Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill/wheel arch (6.2.2 (d) (i))

Coolant leak ()

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Outer Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Vehicles internal headlight adjuster altered to recheck lights ()

fuel leak

under body corrossion

under body corrossion

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Outer Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Front Position lamp not working dip light (4.2.1 (a) (ii))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Vehicles internal headlight adjuster altered to recheck lights ()

fuel leak

Nearside Rear Cross member corroded/holed

Nearside Rear Outer Sill corroded.

Offside Rear Cross member corroded/holed.

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Both inner wheel arches corroded.

Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))

Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill end (5.3.6 (a) (i))

Nearside Rear Cross member corroded/holed

Nearside Rear Outer Sill corroded.

Offside Rear Cross member corroded/holed.

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Both inner wheel arches corroded.

Coolant leak ()

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced wheel arch (6.1.1 (c) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced behind bumper (6.1.1 (c) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced sill area (6.1.1 (c) (i))

Offside Rear wheel arch rusty

Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Coolant leak ()

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced wheel arch (6.1.1 (c) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced behind bumper (6.1.1 (c) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced sill area (6.1.1 (c) (i))

Offside Rear wheel arch rusty

Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Coolant leak ()

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear wheel arch correded

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Coolant leak ()

Oil leak ()

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tie bar/rod ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Oil leak

Battery insecure

Exhaust has part of the system slightly deteriorated (7.1.1a)

Front brake disc slightly pitted (3.5.1h)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear brake disc slightly pitted (3.5.1h)

nearside rear tyre has slight cracking

offside front tyre has slight cracking

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Exhaust has a major leak of exhaust gases (7.1.2)

Fuel system component leaking (7.2.3)

Nearside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Rear Anti-roll bar locating pin locking device missing (2.4.G.3b)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Battery insecure

Exhaust has part of the system slightly deteriorated (7.1.1a)

Front brake disc slightly pitted (3.5.1h)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear brake disc slightly pitted (3.5.1h)

nearside rear tyre has slight cracking

offside front tyre has slight cracking