MOT Status
ExpiredMileage
84,257 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake hydraulic reservoir fluid level below minimum level (3.6.G.1b)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Headlamp not working on main beam (1.7.5a)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear fog lamp not working (1.3.2b)
Offside Rear position lamp(s) not working (1.1.A.3b)
Registration plate lamp not working (1.1.C.1d)
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Oil leak
Play in steering rack inner joint(s)
Vehicle structure has slight corrosion (6.1.A.1)
exhaust mount broken
Vehicle structure has slight corrosion (6.1.A.1)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
exhaust mounting rubber broke
heavy corrosion to inner arches on front
heavy corrosion to underside of vehicle
Nearside Front Anti-roll bar attachment bracket/mounting corroded and its strength is seriously reduced (2.4.G.1)
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)
Offside Front Anti-roll bar attachment bracket/mounting corroded and its strength is seriously reduced (2.4.G.1)
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Vehicle structure has slight corrosion (6.1.A.1)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
corrosion to dottom of drivers door
exhaust mounting rubber broke
heavy corrosion to inner arches on front
heavy corrosion to underside of vehicle
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Very corroded throuh out...N/s./f wiper blade split at ends...Brake fluid low...Exhaust mounting rings broken...Small chips in screen...
Advise rverypart under vehicle corroded... Body panels corroded...
Advise every part under vehicle corroded ...Bobdy panels corroded...
Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)
Offside Front wheel bearing rough when rotated (2.5.A.2)
Offside Rear wheel bearing rough when rotated (2.6.1)
fuel cap not standard fit
ns front tie bar arm bush has slight movement wear
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Brake load sensing valve linkage seized (3.6.E.3)
Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)
Nearside Rear Body has a sharp edge caused by corrosion (6.1.C.1)
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Rear fog lamp missing (1.3.2a)
fuel cap not standard fit
Brake load sensing valve linkage seized (3.6.E.3)
Nearside Front Mechanical brake component has restricted free movement (3.5.1k)
Nearside Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake: efficiency below requirements (3.7.B.7)
Registration plate lamp not working (1.1.5c)
Seat belt anchorage prescribed area is excessively corroded (5.2.6)
both front tyres worn inner edges and close to legal limit
nearside bottom ball joint has play
offside rear outer sill corroded to holes, not in prescribed area
offside rear wheel bearing has play
offside wiper blade should be longer
temporary fuel cap fitted
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Front registration plate missing (6.3.1a)
Nearside Front Headlamp aim too low (1.8)
Nearside Front Headlamp insecure (1.7.3)
Offside Front Headlamp insecure (1.7.3)
Offside Front Suspension component mounting prescribed area is inadequately repaired (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake: efficiency below requirements (3.7.B.7)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Offside Rear Rear wheel bearing has slight play (2.6.2)
Play evident in steering rack.
Play evident in suspension joints.
Brake pipe excessively corroded (3.6.B.2c)
Centre Statutory seat belt missing (5.1.1)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Front Mechanical brake component has restricted free movement (3.5.1k)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Registration plate lamp insecure (1.1.C.1c)
Registration plate lamp not working (1.1.5c)
How Reliable is the Renault Master?
Based on 1,547,762 MOT tests across 123,092 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
M907 SUJ is a 1994 Renault Master in Blue with a 2,499cc diesel engine. This vehicle has been through 17 MOT tests with a personal pass rate of 52.9%.
Across all 1994 Renault Master models, the average MOT pass rate is 60.1% with a typical mileage of 113,865 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Renault Master fails its MOT is parking brake: efficiency below requirements, accounting for 69,954 recorded failures. If you're considering buying M907 SUJ, it's worth having these areas checked by a mechanic before committing.
The Renault Master typically stays on UK roads for around 31 years. At 32 years old, this Renault Master is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of M907 SUJ?
You can check the full history of M907 SUJ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was M907 SUJ registered?
M907 SUJ is a 1994 Renault Master, first registered on 31 December 1994.
Is M907 SUJ safe to buy?
The MOT history for M907 SUJ shows 17 tests with a 52.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does M907 SUJ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on M907 SUJ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.