CarVerify

Free Car Check

M709 BLT

1994 Iveco 35.10 SWB

Red Diesel 2500cc
Search another vehicle

MOT Status

Expired
Expires4 Jun 2011
Tests11 (5 pass, 6 fail)
Pass rate45.5%

Mileage

125,728 mi
Last recorded125,728 miles
Recorded on3 Jun 2011
Typical for 1994 Iveco 35.10 SWB126,061 mi

Below or average mileage for this year

4 checks still locked for this Iveco
Stolen
Finance
Write-off
Keepers
Unlock full report — £4.99
Instant £30k guarantee
or single check £9.99

Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.

Vehicle Details

RegistrationM709 BLT
MakeIveco
Model35.10 SWB
Year1994
ColourRed
Fuel typeDiesel
Engine2,500cc
View full Iveco 35.10 SWB reliability data

All premium checks include

50+ data points
Finance Check (Experian) Insurance Write-off Salvage Auction Stolen Check Previous Owners Ex-Taxi, Police, NHS Mileage Anomaly Import / Export Scrapped Check Plate Changes

MOT History

5 pass 6 fail
Fail 3 Jun 2011 125,728 miles

Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Rear position lamp(s) not working (1.1.A.3b)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Tyre(s) incorrect because tyres with different aspect ratios are fitted on the same axle. (4.1.A.1a)

rear brake application uneven (3.7.B.2)

Offside Front Upper Suspension arm has slight play in a ball joint (2.4.G.2)

Vehicle structure has slight corrosion (6.1.A.1)

both front brake discs corroded and pitted

corrosion at nearside rear of cab not excessive

corrosion on floor at nearside front

Pass 24 May 2010 121,237 miles

Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Fail 22 May 2010 121,237 miles

Nearside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Pass 13 May 2009 115,997 miles

Centre Front Vehicle structure has slight corrosion (6.1.A.1)

Fail 13 May 2009 115,997 miles

Nearside Front Brake pipe inadequately clipped (3.6.B.1)

Offside Front Brake pipe inadequately clipped (3.6.B.1)

Rear fog lamp tell tale not working (1.3.1b)

Centre Front Vehicle structure has slight corrosion (6.1.A.1)

Pass 5 Jun 2008 111,608 miles
Fail 4 Jun 2008 111,608 miles

Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Rear Brake hose ferrule excessively corroded (3.6.B.4e)

Offside Front Brake pipe leaking (3.6.A.1) DANGEROUS

Service brake: efficiency below requirements (3.7.B.7) DANGEROUS

Pass 11 May 2007 105,471 miles

Nearside Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Fail 10 May 2007 105,470 miles

Nearside Front Headlamp not working on main beam (1.7.5a)

Offside Front wheel bearing rough when rotated (2.5.A.2)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Pass 12 Jun 2006 100,385 miles

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Fail 10 Jun 2006 100,381 miles

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Fuel system component leaking (7.2.3)

Nearside Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

How Reliable is the Iveco 35.10 SWB?

Based on 4,003 MOT tests across 700 vehicles.

61.4%
Pass Rate
2,591
Miles/Year
32
Year Lifespan
700
On UK Roads

Top MOT Failure Points

Brake pipe excessively corroded 436
Parking brake: efficiency below requirements 308
Registration plate lamp not working 263
Service brake: efficiency below requirements 249
Tyre tread depth below requirements of 1.6mm 215
Full Iveco 35.10 SWB reliability report

Don't risk it. Know before you buy.

Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.

£30k guarantee Instant results Cancel anytime

M709 BLT is a 1994 Iveco 35.10 SWB in Red with a 2,500cc diesel engine. This vehicle has been through 11 MOT tests with a personal pass rate of 45.5%.

Across all 1994 Iveco 35.10 SWB models, the average MOT pass rate is 62.9% with a typical mileage of 126,061 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.

The most common reason a Iveco 35.10 SWB fails its MOT is brake pipe excessively corroded, accounting for 436 recorded failures. If you're considering buying M709 BLT, it's worth having these areas checked by a mechanic before committing.

The Iveco 35.10 SWB typically stays on UK roads for around 32 years. At 32 years old, this Iveco 35.10 SWB is approaching the upper end of the typical lifespan for this model.

Frequently Asked Questions

How do I check the history of M709 BLT?

You can check the full history of M709 BLT by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.

What year was M709 BLT registered?

M709 BLT is a 1994 Iveco 35.10 SWB, first registered on 5 December 1994.

Is M709 BLT safe to buy?

The MOT history for M709 BLT shows 11 tests with a 45.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.

Does M709 BLT have outstanding finance?

Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on M709 BLT. If you buy a car with outstanding finance, the finance company can repossess it.

No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.