2004 Mazda Bongo

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Central Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Exhaust corroded

Front Subframe mounting prescribed area is corroded but not considered excessive Both sides. Also covered in underseal (5.3.6 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced Underside and sills corroded (6.1.1 (c) (i))

Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive from transmission (8.4.1 (a) (i))

Power steering component has slight seepage from a component by the rack (2.1.5 (a))

Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Rear Coil spring corroded Both sides (5.3.1 (b) (i))

Rear axle corroded

Vehicle undersealed including various repaired areas

Horn not working (7.7 (a))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Offside Headlamp aim too low (4.1.2 (a))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor and inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill and floor (7.1.1 (a) (i))

Exhaust mounting defective (6.1.2 (a))

Power steering component has slight seepage from a component around rack (2.1.5 (a))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

rear cross member and floor holed and corroded

Front wipers in poor condition

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

under side corroded

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

surface corrosion to front and rear suspension components

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Rear Anti-roll bar attachment bracket/mounting insecure (5.3.3 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

surface corrosion to front and rear suspension components

corrosion to osr brake backplate

surface corrosion to front and rear suspension components

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Offside Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

corrosion on various suspension components underside

osr brake backplate corroded

Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Macpherson strut corroded but not seriously weakened (2.4.G.1)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front coil spring corroded (2.4.C.1b)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Front Macpherson strut corroded but not seriously weakened (2.4.G.1)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front coil spring corroded (2.4.C.1b)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear coil spring corroded (2.4.C.1b)

Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Rear Brake pipe slightly corroded (3.6.B.2c)

front hubs corroded

vehicle has been stood

Nearside Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Macpherson strut corroded but not seriously weakened (2.4.G.1)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front coil spring corroded (2.4.C.1b)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Front Macpherson strut corroded but not seriously weakened (2.4.G.1)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front coil spring corroded (2.4.C.1b)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear coil spring corroded (2.4.C.1b)

Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Rear Brake pipe slightly corroded (3.6.B.2c)

front hubs corroded

oil leak from rear differiential

vehicle has been stood

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Nearside sill inner and outer corroded but not in prescribed area

Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Front brake disc worn, pitted or scored, but not seriously weakened inner face (3.5.1i)

Offside Rear chassis heavy surface corrosion

Offside sill inner and outer corroded but not in prescribed area

Rear cross member corroded but not in prescribed area

all coil springs corroded

slight oil leak to steering rack area

Front registration plate delaminated but not likely to be misread (6.3.1d)

Oil leak

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Tyre worn close to the legal limit (4.1.E.1)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear registration plate delaminated but not likely to be misread (6.3.1d)

all chassis, suspension, brakes and sils corroded

vehicle is undersealed, may affect inspection

Offside Front Tyre worn close to the legal limit (4.1.E.1)

nsf and osf cv boot cracking

rear valance excessive corroded around exhaust mounts

nsr bumper section insecure

Fuel system component leaking (7.2.3)

Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Suspension arm locating pin retaining device missing (2.4.G.3b)

Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear Seat belt locking mechanism does not secure or release (5.2.5a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Suspension arm locating pin retaining device missing (2.4.G.3b)

Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

nsf and osf cv boot cracking

rear valance excessive corroded around exhaust mounts

nsr bumper section insecure

Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Rear registration plate delaminated but not likely to be misread (6.3.1d)

both front and rear registration plate lettering smaller than standard

offside rear diff seal leaking grease/oil

Driver's door cannot be opened from inside the vehicle (6.2.B.1b)

Nearside Front Lower Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Nearside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Lower Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Registration plate lamp not working (1.1.C.1d)

Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Rear registration plate delaminated but not likely to be misread (6.3.1d)

both front and rear registration plate lettering smaller than standard

offside rear diff seal leaking grease/oil

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Rear Body has slight corrosion (6.1.B.2)

Nearside Rear Upper Body has slight corrosion (6.1.B.2)

Offside Outer Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Upper Body has slight corrosion (6.1.B.2)

Under-trays fitted obscuring some underside components

Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Rear Body has slight corrosion (6.1.B.2)

Nearside Rear Upper Body has slight corrosion (6.1.B.2)

Offside Outer Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Upper Body has slight corrosion (6.1.B.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.C.1b)

Under-trays fitted obscuring some underside components

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Vehicle structure has slight corrosion (6.1.A.1)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Oil leak

Rear Brake pipe slightly corroded (3.6.B.2c)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Vehicle structure has slight corrosion (6.1.A.1)

handbrake travel high

rear axle casing corroded

rear wheelarches corroded

wipers smearing slightly

Emissions not tested (7.0)

Exhaust has a part missing (7.1.1a)

Nearside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear position lamp(s) not working (1.1.A.3b)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Vehicle structure has slight corrosion (6.1.A.1)

Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Oil leak

Rear Brake pipe slightly corroded (3.6.B.2c)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Vehicle structure has slight corrosion (6.1.A.1)

handbrake travel high

rear axle casing corroded

rear wheelarches corroded

wipers smearing slightly

Front Brake pipe excessively corroded (3.6.B.2c)

Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Fuel system component leaking (7.2.3)

Nearside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)