2005 Mitsubishi Fto

Headlamps matched pair are not the same colour (4.1.4 (d))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Parking brake inoperative on one side (1.4.1 (a))

Nearside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Offside Service brake excessively binding (1.2.1 (f))

Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

both front floors and rear chassis corroded and undersealed

Nearside Front Lower anti roll bar link rubber deteriorated

both headlight lens misted

o/s and n/s front floors corroded

o/s and n/s rear chassis s corroded

Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor (6.1.B.2)

Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)

Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor (6.1.B.2)

Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

Both inner sills starting to corrode

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Nearside rear chassis corroding

Sill covers fitted

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Headlamp not working on dipped beam (1.7.5a)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear Exhaust has a part missing (7.1.1a)

Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nail in offside rear tyre

Offside Rear Bonded suspension unit deteriorated but can function as intended (2.4.F.3)

Centre Exhaust has part of the system excessively deteriorated (7.1.1a)

Nail in offside rear tyre

Offside Rear Bonded suspension unit deteriorated but can function as intended (2.4.F.3)

Horn not working (1.6.2a)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear brake disc excessively scored (3.5.1h)

Nearside Steering rack gaiter split (2.2.D.2d)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear brake disc excessively scored (3.5.1h)

Offside Steering rack gaiter split (2.2.D.2d)

Service brake: efficiency below requirements (3.7.B.7)