2006 Mazda Bongo

Brake lever has insufficient reserve travel (1.1.2 (a))

Emissions not tested (8.2.2.2 (e))

Exhaust has a major leak of exhaust gases flexy (6.1.2 (a))

Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced valance under radiator (6.1.1 (c) (i))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Lower Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wing holed not with in 30cm (6.1.1 (c) (i))

Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch (7.1.1 (a) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arches (6.1.1 (c) (i))

Offside Rear Lower Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill x3 (7.1.1 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch (7.1.1 (a) (i))

Rear Anti-roll bar pin or bush excessively worn d bushes both (5.3.4 (a) (i))

Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Nearside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced wings holed not within 30 cm (6.1.1 (c) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner arches (6.1.1 (c) (i))

Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced arch (6.1.1 (c) (i))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner arch (6.1.1 (c) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced ADVANCED CORROSION AT THE JOIN O/S FRONT CHASSIS RAIL WITH FRONT CROSS MEMBER (6.1.1 (c) (i))

Nearside Steering rack gaiter split (2.2.D.2d)

Offside Rear Anti-roll bar attachment bracket/mounting fractured (2.4.G.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Rear fog lamp not working (1.3.2b)

Rear fog lamp tell tale not working (1.3.1b)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Bonnet stay missing.

Long parking brake travel.

Minor oil leak.

Rear tyres wearing close to legal limit and wearing centre of tread.

Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Brake pad(s) less than 1.5 mm thick (3.5.1g)

Exhaust has a major leak of exhaust gases (7.1.2)

Offside Rear Anti-roll bar attachment bracket/mounting insecure (2.4.G.1)

Offside Rear fog lamp not working (1.3.2b)

Bonnet stay missing.

Long parking brake travel.

Minor oil leak.

Rear tyres wearing close to legal limit and wearing centre of tread.

Front Front position lamp(s) not working (1.1.A.3b)

Parking brake lever has no reserve travel (3.1.6b)

Rear Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)