1995 Kia Pride

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Front passenger door cannot be opened from inside the vehicle (6.2.3 (a))

Horn not working (7.7 (a) (ii))

Nearside Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Rear Other passenger door cannot be opened from outside the vehicle (6.2.3 (a))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill (7.1.1 (a) (i))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Floor (7.1.1 (a) (i))

Offside Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))

Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i))

Offside Rear Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside rear brake binding (3.7.B.1)

Offside Rear Brake hose ferrule excessively corroded (3.6.B.4e)

Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear wheel bearing rough when rotated (2.6.1)

Offside Rear Braking system leaking (3.6.A.1) DANGEROUS

Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt Nearside (2.5.C.1a)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Nearside Rear Brake pipe leaking (3.6.A.1) DANGEROUS

Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt Nearside (2.5.C.1a)

Brake pipe slightly corroded All rear (3.6.B.2c)

Nearside Rear Rear wheel bearing has slight play (2.6.2)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Upper Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Lower Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear wheel bearing has excessive play (2.6.2)

Nearside rear brake application uneven (3.7.B.2)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Direction indicator incorrect colour (1.4.A.2f)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Upper Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside front brake binding (3.7.B.1)

Offside rear brake binding (3.7.B.1)

Brake servo corroded but not excessively weakened (3.6.A.2b)

Offside Front Seat belt stitching slightly frayed (5.2.2b)

Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Rear wheel bearing has slight play (2.6.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp insecure (1.7.3)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Rear wheel bearing has slight play (2.6.2)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

slight bind on o/s/r wheel

ALL RIDGID BRAKE PIPES HAS BEEN COVERED IN GREASE

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

n/s/r tyre outer sidewall poor

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Service brake: efficiency below requirements (3.7.B.7)

ALL RIDGID BRAKE PIPES HAS BEEN COVERED IN GREASE

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

n/s/r tyre outer sidewall poor

Brake master cylinder leaking hydraulic fluid (3.6.G.1f)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside rear parking brake recording little or no effort (3.7.B.6a)