MOT Status
ExpiredMileage
187,677 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
O/S OUTER SILL NOT CHECKED DUE TO COVER
OIL LEAK
Rear Anti-roll bar has slight play in a ball joint BOTH SIDES (2.4.G.2)
unable to check repair on brake pipes ans welding due to underseal cover
Nearside Brake pipe excessively corroded O/S.R (3.6.B.2c)
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Seat belt anchorage prescribed area is excessively corroded CENTRE SILL (5.2.6)
Offside Rear Suspension component mounting prescribed area is excessively corroded INNER SILL (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded INNER SILL (2.4.A.3)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Rear rear brake application uneven (3.7.B.2)
O/S OUTER SILL NOT CHECKED DUE TO COVER
OIL LEAK
Rear Anti-roll bar has slight play in a ball joint BOTH SIDES (2.4.G.2)
Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.C.1b)
Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Windscreen washer provides insufficient washer liquid (8.2.3)
rear brake application uneven (3.7.B.2)
Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Oil leak
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Oil leak
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
rear brake application uneven (3.7.B.2)
Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Oil leak
Brake pipe slightly corroded (3.6.B.2c)
Oil leak
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)
Headlamp incorrect colour (1.7.5b)
Nearside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear fog lamp not working (1.3.2b)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Oil leak
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)
Headlamp incorrect colour (1.7.5b)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Brake pipe slightly corroded (3.6.B.2c)
Headlamp deteriorated but light output not reduced (1.7.5a)
Oil leak
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Brake pipe slightly corroded (3.6.B.2c)
Headlamp deteriorated but light output not reduced (1.7.5a)
Oil leak
Front position lamp(s) incorrect colour (1.1.A.3e)
Headlamp incorrect colour (1.7.5b)
Nearside Steering rack gaiter split (2.2.D.2d)
Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Oil leak
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Front Brake pipe inadequately clipped (3.6.B.1)
Offside Front position lamp(s) not working (1.1.A.3b)
Nail in offside rear tyre
Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Both front tyres worn low on the inside shoulders of the tread
Both sides rear chassis rails corroded
Nearside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)
Nearside Front Windscreen wiper blade deteriorated (8.2.2)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Front Front position lamp(s) not in good working order (function impaired) (1.1.4a)
Offside Front Windscreen wiper blade deteriorated (8.2.2)
Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside rear brake binding (3.7.B.1)
Both front tyres wearing low
Both sides rear chassis rails corroded
Slight lift in both sides front strut tops
Offside Front position lamp(s) not working (1.1.A.3b)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Suspension arm has excessive play in a pin/bush (2.4.G.2)
Off side blade is torn †Front inner wings are poorly welded †Near side front pads are low †Near side rear brake hose is wet †Rear chassis is blistered and weak †Rear anti roll bar mounting bushes are worn †Rear chassis legs are poorly welded
How Reliable is the Mitsubishi Fto?
Based on 55,254 MOT tests across 5,410 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
M226 UJL is a 2001 Mitsubishi Fto in Silver with a 1,998cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 50%.
Across all 2001 Mitsubishi Fto models, the average MOT pass rate is 63.1% with a typical mileage of 100,267 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mitsubishi Fto fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 4,056 recorded failures. If you're considering buying M226 UJL, it's worth having these areas checked by a mechanic before committing.
The Mitsubishi Fto typically stays on UK roads for around 32 years. At 25 years old, this Mitsubishi Fto is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of M226 UJL?
You can check the full history of M226 UJL by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was M226 UJL registered?
M226 UJL is a 2001 Mitsubishi Fto, first registered on 13 July 2001.
Is M226 UJL safe to buy?
The MOT history for M226 UJL shows 22 tests with a 50% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does M226 UJL have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on M226 UJL. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.