MOT Status
ExpiredMileage
171,811 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Suspension component mounting prescribed area is corroded but not considered excessive sill and inner sill (5.3.6 (a) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Suspension component mounting prescribed area is corroded but not considered excessive sill and inner sill (5.3.6 (a) (i))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
o/s and n/s outer sills corroded
Nearside Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i))
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
o/s and n/s outer sills corroded
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Front Brake pad(s) wearing thin s (3.5.1g)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Lower Steering column universal joint has slight play (2.1.5)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin s (3.5.1g)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Front Brake pad(s) wearing thin s (3.5.1g)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Lower Steering column universal joint has slight play (2.1.5)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin s (3.5.1g)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
All position lamps not working (1.1.A.3b)
Front Fuel system component leaking (7.2.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Rear fog lamp not working (1.3.2b)
Rear fog lamp tell tale not working (1.3.1b)
Speedometer cannot be illuminated. (6.7.3)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Rear Brake pad(s) wearing thin (3.5.1g)
Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded arch (5.2.6)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Lower Front suspension ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Rear Anti-roll bar attachment bracket/mounting damaged and its strength is seriously reduced (2.4.G.1)
Offside Lower Front suspension ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.4.G.2)
Front Brake pad(s) wearing thin (3.5.1g)
Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
NEARSIDE REAR WHEEL ARCH SLIGHTLY CORRODED
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Headlamp aim too high (1.8)
Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
How Reliable is the Ford Bongo?
Based on 4,842 MOT tests across 228 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
M207 XJK is a 1995 Ford Bongo in Maroon with a 2,500cc diesel engine. This vehicle has been through 23 MOT tests with a personal pass rate of 65.2%.
Across all 1995 Ford Bongo models, the average MOT pass rate is 67.7% with a typical mileage of 141,932 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Bongo fails its MOT is fog lamp not working, accounting for 159 recorded failures. If you're considering buying M207 XJK, it's worth having these areas checked by a mechanic before committing.
The Ford Bongo typically stays on UK roads for around 31 years. At 31 years old, this Ford Bongo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of M207 XJK?
You can check the full history of M207 XJK by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was M207 XJK registered?
M207 XJK is a 1995 Ford Bongo, first registered on 30 March 1995.
Is M207 XJK safe to buy?
The MOT history for M207 XJK shows 23 tests with a 65.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does M207 XJK have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on M207 XJK. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.