1995 Suzuki GSF600

Drive chain slightly tight (6.1.7 (k) (i))

Front Brake binding but not excessively (1.2.1 (f))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Lower Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Valve stem slightly damaged (5.2.3 (j))

Rear tyre is perishing with deep cracks on the sidewalls, but unable to see cord

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Headlamp aim too high and too far to the right (4.1.2 (a))

Offside Front Shock absorber has a serious fluid leak fork seal (5.3.2 (b))

Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Throttle operating incorrectly throttle grip insecure. (6.2.7 (a) (i))

Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) DANGEROUS

Front Stop lamp switch does not operate in accordance with the requirements (4.3.2 (a) (i))

Rear Suspension rod pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Valve stem slightly damaged (5.2.3 (j))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

FRONT FORK OPERATION SLIGHTLY STIFF

Rear Brake binding but not excessively (1.2.1 (f))

Rear Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Steering headbearing has slight free play (2.2.2 (f) (i))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Brake binding but not excessively (1.2.1 (f))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear wheel bearings have slight free play (2.4.A.2c)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front shock absorber seal failed and leaking oil (2.3.3)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Floor brake test indicates a sticking brake (3.3.C2c)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)