MOT Status
ExpiredMileage
176,931 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength mid outer sill (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner step (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength mid outer sill (5.3.6 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
both front inner wheel arches showing corrosion
radiator support corroded
underbody/suspension and components showing general corrosion
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength mid inner sill (5.3.6 (a) (i))
Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength mid inner sill (5.3.6 (a) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
both front inner wheel arches showing corrosion
radiator support corroded
underbody/suspension and components showing general corrosion
Central Front Vehicle structure is corroded but structural rigidity is not significantly reduced cross member under radiator (6.1.1 (c) (i))
Central Lower Integral body structure is corroded but structural rigidity is not significantly reduced Both outer sills under vehicle (6.1.1 (c) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced All under body (6.1.1 (c) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced Both rear wheel arches at front (6.1.1 (c) (i))
Offside Windscreen wiper blade defective (3.4 (b) (i))
Front Vehicle structure is corroded but structural rigidity is not significantly reduced crossmember (6.1.1 (c) (i))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
general under body corrosion
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Exhaust tail pipe end missing
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Anti-roll bar attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i))
Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Exhaust tail pipe end missing
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
All rear suspension bushes perished but no excessive movement
Coil spring corroded All (5.3.1 (b) (i))
Rear floor/joint panels corroded and holed
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Fuel cap/sealing device missing (6.1.3 (b) (i))
Nearside Front Service brake excessively binding (1.2.1 (f))
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
All rear suspension bushes perished but no excessive movement
Coil spring corroded All (5.3.1 (b) (i))
Rear floor/joint panels corroded and holed
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Offside Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Body has slight corrosion (6.1.B.2)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Rear Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Nearside Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)
Body has slight corrosion (6.1.B.2)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Vehicle structure has slight corrosion (6.1.A.1)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Rear Anti-roll bar attachment bracket/mounting fractured (2.4.G.1)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Vehicle structure has slight corrosion (6.1.A.1)
Vehicle structure has slight corrosion (6.1.A.1)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Rear fog lamp slightly discoloured (1.3.2e)
Front Tyre worn close to the legal limit (4.1.E.1)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Offside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
M186 YWF is a 2005 Mazda Bongo in Green with a 2,490cc diesel engine. This vehicle has been through 30 MOT tests with a personal pass rate of 66.7%.
Across all 2005 Mazda Bongo models, the average MOT pass rate is 66.8% with a typical mileage of 133,806 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying M186 YWF, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 21 years old, this Mazda Bongo is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of M186 YWF?
You can check the full history of M186 YWF by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was M186 YWF registered?
M186 YWF is a 2005 Mazda Bongo, first registered on 1 September 2005.
Is M186 YWF safe to buy?
The MOT history for M186 YWF shows 30 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does M186 YWF have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on M186 YWF. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.