2012 Mazda 5

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Suspension arm corroded but not seriously weakened n/s and o/s (5.3.3 (b) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement n/s and o/s trailing arm bushes (5.3.4 (a) (i))

Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security n/s and o/s trailing arm mount area (6.2.2 (d) (i))

Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security n/s and o/s inner sills (6.2.2 (d) (i))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Calliper coated in fluid/grease but not leaking at time of test

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Inner Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security n/s and o/s sills (6.2.2 (d) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Suspension arm corroded but not seriously weakened n/s and o/s suspension Spring mounting arms (5.3.3 (b) (i))

Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security n/s and o/s trailing arm mount area (6.2.2 (d) (i))

Exhaust heat shield slightly insecure

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Brake calliper coated in oil/grease, not leaking at time of test

Rear Suspension arm pin or bush worn but not resulting in excessive movement n/s and o/s trailing arm bushes (5.3.4 (a) (i))

Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security n/s and o/s trailing arm mount area (6.2.2 (d) (i))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Exhaust heat shield slightly insecure

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Brake calliper coated in oil/grease, not leaking at time of test

Rear Suspension arm pin or bush worn but not resulting in excessive movement n/s and o/s trailing arm bushes (5.3.4 (a) (i))

Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security n/s and o/s trailing arm mount area (6.2.2 (d) (i))

Coolant leak ()

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement n/s & o/s (5.3.4 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive Trailing arms and subframe mounting area (5.3.6 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive n/s & o/s inner sills (5.3.6 (a) (i))

Central Front Lower Engine mounting damaged but not to excess (6.1.8 (a) (i))

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Central Front Lower Engine mounting damaged but not to excess (6.1.8 (a) (i))

Rear Anti-roll bar linkage ball joint has slight play n/s & o/s (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Upper Windscreen damaged but not adversely affecting driver's view stone chip (3.2 (a) (i))

Rear Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Rear tyre worn on edges

Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear tyre worn on inside

Rear unable to fully test 3rd row seat belts due to personal belongings

covers and undertrays fitted

Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)