2014 Sym Az

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

REAR TYRE STARTING TO PERISH

Rear Tyre worn close to the legal limit (5.2.3 (e))

Wheel alignment slightly misaligned (2.4 (a))

Front Wheel bearing has excessive play (5.1.3 (a) (i))

Rear Tyre not fitted in accordance with side wall instructions wrong rotation (5.2.3 (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Tyre worn close to the legal limit (5.2.3 (e))

Wheel alignment slightly misaligned (2.4 (a))

front tyre starting to perish.

Rear Wheel hub worn to the extent that wheel security is adversely affected (5.2.1 (b) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Nearside Direction indicator not working (4.4.1 (a) (ii))

Front Brake lever is bent and the brake cannot be readily applied (1.1.2 (d))

Rear Tyre designed for front wheel use fitted to the rear wheel (5.2.3 (a))

Rear Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Tyre worn close to the legal limit (5.2.3 (e))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Registration plate does not conform to the specified requirements (0.1 (d))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Steering headbearing has excessive free play (2.2.2)

Rear wheel bearings have excessive free play (2.4.A.2c) DANGEROUS

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Headlamp aim too low (1.6)

Rear Brake disc(s) excessively worn (3.2.A1l)

Rear Tyre not fitted in accordance with side wall instruction/s (4.1.2e)

Steering headbearing has excessive free play (2.2.2)

Rear Tyre is incorrectly seated on the wheel rim (4.1.2b) DANGEROUS

Front Brake lever is bent but brake can still be readily applied (3.1.3c)