2011 Ktm Duke

Rear Brake disc worn, pitted or scored, but not seriously weakened rear disc (1.1.14 (a) (ii))

Rear Drive chain slightly loose slightly loose (6.1.7 (c) (i))

Rear Drive chain worn but not considered excessive chain (6.1.7 (c) (i))

Front Stop lamp not working not working (4.3.1 (a) (ii))

Front Upper Steering headbearing has excessive wear or free play steering head loose (2.2.2 (f) (i))

Offside Front Shock absorber has a serious fluid leak fork seal leaking (5.3.2 (b))

Rear Rear reflector missing missing (4.8.2 (a) (ii))

Front Tyre tread depth is below minimum requirements of 1.0mm front tyre (5.2.3 (e)) DANGEROUS

Rear Brake disc worn, pitted or scored, but not seriously weakened rear (1.1.14 (a) (ii))

Rear Drive chain slightly loose chain loose (6.1.7 (c) (i))

Rear Drive chain worn but not considered excessive chain worn (6.1.7 (c) (i))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b))

Stop lamp not working Front brake lever (4.3.1 (a) (ii))

Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) DANGEROUS

Exhaust silencer slightly loose (8.1.1 (b) (i))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Exhaust noisy (8.1.1 (a))

Front Wheel excessively distorted (5.2.2 (c) (i))

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Rear Wheel alignment slightly misaligned (2.4 (a))

Rear reflector missing (4.8.2 (a) (ii))

Exhaust mounting deteriorated. (7.1.1.c)

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Front Tyre has a lump caused by separation or partial failure of its structure (4.1.2a(ii))

Handlebar deformed (2.1.1b)

Wheel alignment incorrect which adversely affects the steering (2.5.1)