2008 Mitsubishi Canter

Drag link end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Front Obligatory mirror slightly damaged (3.3 (b) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Body component corroded and likely to cause injury BODY RUNNING CHASSIS (6.2.1 (a) (i))

Emissions not tested (8.2.2.2 (e))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Fuel cap/sealing device ineffective (6.1.3 (b) (i))

Nearside Rear Direction indicator lens defective such that the emitted light is adversely affected (4.4.1 (b) (ii))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Trailer electrical socket likely to become detached (4.10 (a) (ii))

Body mounting fixings insecure such that stability is seriously impaired CORRODED AROUND HINGE/MOUNTING POINT (6.2.2 (c) (ii)) DANGEROUS

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Inner Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Inner Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Outer Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Drag link end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Front Obligatory mirror slightly damaged (3.3 (b) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Obligatory mirror slightly damaged (3.3 (b) (i))

Tipper body chassis frame corroded and holed. Front, both sides

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Obligatory mirror slightly damaged (3.3 (b) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Tipper body chassis frame corroded and holed. Front, both sides

Nearside Front Headlamp aim too high (4.1.2 (a))

Offside Front Headlamp aim too high and too far to the left. (4.1.2 (a))

centre exhaust system mounting bracket broken

Nearside Rear position lamp(s) not working (1.1.A.3b)

Nearside Stop lamp not working (1.2.1b)

centre exhaust system mounting bracket broken

Oil leak ()

rear exhaust system mounting bracket broken

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Front Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Body has a sharp edge caused by damage (6.1.C.1)

Offside Body has a sharp edge caused by damage (6.1.C.1)

Offside Front Body has a sharp edge caused by damage (6.1.C.1)

Offside Front Body has a sharp edge caused by damage (6.1.C.1)

Offside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)

Offside Stop lamp not working (1.2.1b)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Offside Headlamp damaged but light output not reduced (1.7.5a)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)