2003 Yamaha XJ600

Exhaust noisy (8.1.1 (a))

FRONT TYRE STARTING TO SURFACE CRACK

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Front Horn sound not in accordance with requirements (7.7 (c))

Front small oil leak from rocker cover and oil pipe.

Front Horn not working (7.7 (a))

Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Front Clutch lever shortened (6.2.7 (b))

Front small oil leak from rocker cover and oil pipe.

Rear Drive chain worn but not considered excessive (6.1.7 (c) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Drive chain worn but not considered excessive (6.1.7 (c) (i))

Clutch lever shortened (6.2.7 (b))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake excessively binding (1.2.1 (f))

Lower Engine mounting/bracket excessively loose nut missing (6.1.8 (a) (ii)) DANGEROUS

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

front wheel bearings and wheel run out not test due front wheel does not turn frrly due brakes binding

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

side stand is stiff to return.

Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear Brake disc(s) has slight run out (3.2.A1m)

Front Tyre is unsuitable (4.1.1)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear Brake disc(s) has slight run out (3.2.A1m)

Drive chain excessively loose (6.2.1d)

Front wheel bearings have excessive free play (2.3.5b)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))