2003 Piaggio ET2

Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced under floor pan holed and corroided (6.1.1 (c) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Front Tyre worn close to the legal limit (5.2.3 (e))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre worn close to the legal limit (4.1.3(i))

Rear Roller brake test Higher brake efficiency normally obtainable. (3.3.A2a)

Rear Tyre worn close to the legal limit (4.1.3(i))

Front Headlamp insecure (1.2.3b)

Rear Tyre worn close to the legal limit (4.1.3(i))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Tyre worn close to the legal limit (4.1.3(ii))

speedo cable broken

full beam tell tale not working

seat lock not working,

Offside Front Direction indicator insecure (1.5.3b)

Offside Front Direction indicator not working (1.5.1c)

Rear Brake lining(s) less than 1.5 mm thick (3.2.A1f(i))

Riders seat insecure (6.2.1a)

Headlamp aim too low when the centre of the headlamp is below 850mm from the ground (1.6.2)

Headlamp insecure (1.2.3b)

Rear Brake lever has inadequate reserve travel (3.1.3b)

Rear Rear shock absorber has inadequate damping effect. (2.4.A.3b)