2009 Triumph Sprint ST 1050 (abs)

Floor brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Headlamp aim too low dip beam beam (4.1.2 (a))

Shock absorber has a serious fluid leak both front fork oil seals (5.3.2 (b))

Stop lamp remains on when the brakes are released (4.3.2 (a) (iii)) DANGEROUS

Tyre tread depth is below minimum requirements of 1.0mm front tyre (5.2.3 (e)) DANGEROUS

Tyre tread depth is below minimum requirements of 1.0mm rear tyre (5.2.3 (e)) DANGEROUS

Headlamp light source and lamp not compatible H.I.D. retrofitted (4.1.4 (c))

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Drive chain has "tight" spots.

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) less than 1.0 mm thick worn down to the steel backing. (1.1.13 (a)) DANGEROUS

Drive chain has "tight" spots.

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Locking devices not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Locking devices not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

rear tyre worn to near wear limit will req new one soon

rear tyre worn to near wear limit will req new one soon