2008 Moto Guzzi Stelvio

Brake pedal is bent and the brake cannot be readily applied lever linkage rod (1.1.2 (d))

Front Wheel bearing has excessive play (5.1.3 (a) (i))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Exhaust noisy (8.1.1 (a))

Front Tyre worn close to the legal limit (5.2.3 (e))

Exhaust noisy (8.1.1 (a))

Front Tyre worn close to the legal limit (5.2.3 (e))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Rear Exhaust noisy (8.1.1 (a))

Exhaust noisy (8.1.1 (a))

Front Mudguard insecure ()

Exhaust noisy (8.1.1 (a))

Exhaust noisy (8.1.1 (a))

Registration plate does not conform to the specified requirements (0.1 (d))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Registration plate deteriorated (6.3.1d)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre worn close to the legal limit (4.1.3(ii))

Number plate light not working

Rear suspension bush has slight free play (2.4.A2a(i))

continental headlights

Rear Tyre not fitted in accordance with side wall instruction/s (4.1.2e)

Number plate light not working

Rear suspension bush has slight free play (2.4.A2a(i))

continental headlights

continental headlamps fitted.

front tyre worn to 1mm.

rear driveshaft torque arm front mounting as sideways movement.