2005 Honda Cbr

Rear Roller brake test indicates a binding brake (3.3.A1a)

Rear Brake component is slightly corroded (3.1.5)

Steering headbearing has slight free play (2.2.2)

Fairings insecure and likely to impede the steering (2.1.2e)

Front position lamp insecure (1.1.1c)

Fuel cap does not fasten securely maintaining the sealing arrangement (7.2.2b)

Headlamp switch faulty (1.2.4)

Nearside Front Direction indicator insecure (1.5.3b)

Offside Front Direction indicator insecure (1.5.3b)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Roller brake test indicates a binding brake (3.3.A1a)

Stop lamp remains on when the brake is released (1.3.1e)

Drive chain slightly loose (6.2.1d)

Exhaust noisy (7.1.2)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear Brake disc(s) slightly worn (3.2.A1l)

Steering headbearing has slight free play (2.2.2)

Exhaust noisy (7.1.2)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front wheel bearings have slight free play (2.3.5b)

Drive chain slightly tight (6.2.1d)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front mudguard insecure (2.3.7)

Offside Steering control has reduced clearance at full lock not affecting the riders grasp of handlebars (2.1.2b)

Rear Brake fluid reservoir fluid level low (3.2.B1d)

Rear suspension lightly rubbing not affecting the movement of the rear suspension (2.4.A.3a)

Drive chain slightly tight (6.2.1d)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Tyre worn close to the legal limit (4.1.3(ii))

Offside Steering control has reduced clearance at full lock not affecting the riders grasp of handlebars (2.1.2b)

Rear Brake fluid reservoir fluid level low (3.2.B1d)

Rear suspension lightly rubbing not affecting the movement of the rear suspension (2.4.A.3a)

Rear suspension lightly rubbing not affecting the movement of the rear suspension (2.4.A.3a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear suspension lightly rubbing not affecting the movement of the rear suspension (2.4.A.3a)

Rear Tyre worn close to the legal limit (4.1.3(ii))