2016 Keeway Rk

Indicator switch faulty cap missing on switch (4.4.2 (a) (i))

Drive chain slightly tight links siezed in chain (6.1.7 (k) (i))

Front Motorcycle structure is corroded but structural rigidity is not significantly reduced frame down tube (6.1.1 (c) (i))

Indicator switch not able to be operated from the normal riding position bar muffs interfering (4.4.2 (a) (i))

Nearside Rear Wheel bearing has slight play cush drive bearing (5.1.3 (a) (i))

Rear Brake lining(s) close to minimum limit nearly worn out (1.1.13 (a))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Rear Road spring corroded (5.3.1 (b) (i))

Rear Shock absorber has a reduced damping effect (5.3.2 (b))

Rear cush drive rubbers compressed

Front Stop lamp switch does not operate in accordance with the requirements connector loose (4.3.2 (a) (i))

Nearside Indicator switch faulty cap missing off lever,but still operate (4.4.2 (a) (i))

Rear Shock absorber has a reduced damping effect both soft (5.3.2 (b))

Rear Wheel bearing has slight play sprocket carrier bearing (5.1.3 (a) (i))

Front Stop lamp switch does not operate in accordance with the requirements connector loose (4.3.2 (a) (i))

Nearside Indicator switch faulty cap missing off lever,but still operate (4.4.2 (a) (i))

Rear Brake lagging in operation required adjustment of nut (1.2.1 (d))

Rear Shock absorber has a reduced damping effect both soft (5.3.2 (b))

Rear Wheel bearing has slight play sprocket carrier bearing (5.1.3 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps bulb blown(silver) (4.7.1 (b) (ii))

Front Stop lamp switch does not operate in accordance with the requirements wires disconnected (4.3.2 (a) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Front Stop lamp switch does not operate in accordance with the requirements wires disconnected (4.3.2 (a) (i))

Horn not working wire broken (7.7 (a))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Wheel bearing has slight play cush drive rubber and bearing (5.1.3 (a) (i))

Drive chain excessively loose (6.1.7 (c) (i))

Drive chain worn to excess (6.1.7 (c) (i))

Headlamp aim too low (4.1.2 (a))

Wheel bearing has slight play cush drive rubber and bearing (5.1.3 (a) (i))

Front Brake indicates a slightly grabbing brake (1.2.1 (c))

battery not holding charge

fuel cap seal starting to deteriorate

lock stops damaged on bottom yoke both sides

Rear Wheel bearing has slight play cush drive bearing (5.1.3 (a) (i))

choke cable touching tank lock-lock