2008 Honda Sh 125-8

Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Front Brake binding but not excessively (1.2.1 (f))

Front Brake lever pivots slightly worn (3.1.3a)

Front Handlebar mounting clamp bolt loose (2.1.1a)

Front Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Brake lever cannot be applied smoothly (3.1.3d)

Rear Brake lever cannot be released smoothly (3.1.3d)

Rear Brake lever has inadequate reserve travel (3.1.3b)

Rear Brake lever pivots excessively worn (3.1.3a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Front Brake lever pivots slightly worn (3.1.3a)

Front Brake disc(s) excessively worn (3.2.A1l)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Handlebar mounting clamp bolt loose (2.1.1a)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear Brake lever has inadequate reserve travel (3.1.3b)