2002 Ccm 604 E

Exhaust noisy (8.1.1 (a))

Exhaust noisy (8.1.1 (a))

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Brake lever has inadequate reserve travel (3.1.3b)

Front Stop lamp affected by the operation of another lamp (1.3.2)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear suspension bearing has slight free play (2.4.A2a(i))

h/lamp secured by cable ties

Horn not working (1.7.3a)

Rear suspension bearing has slight free play (2.4.A2a(i))

Registration plate with character(s) which are not the correct height (6.3.4a)

h/lamp secured by cable ties

Exhaust is leaking and excessively noisey (7.1.1b)

Headlamp aim not tested (1.6)

Headlamp insecure (1.2.3b)

Horn missing (1.7.1)

Registration plate with character(s) which are not the correct height (6.3.4a)

Registration plate with character(s) which are not the correct width (6.3.4a)

Rear suspension bearing has slight free play (2.4.A2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Tyre worn close to the legal limit (4.1.3(ii))

Nearside Rear Direction indicators not working (1.5.1c)

Offside Brake lever pivots slightly worn (3.1.3a)

Rear Rear suspension bush has slight free play (2.4.A2a(i))

clutch lever pivoits slightly worn

Headlamp aim too low (1.6)

Offside Brake lever pivots slightly worn (3.1.3a)

Rear suspension bush has slight free play (2.4.A2a(i))

clutch lever pivoits slightly worn

Exhaust slightly deteriorated (7.1.1a)

Front Headlamp aim beam image kick-up is to the offside (1.6.1)

Front Headlamp aim too low when the centre of the headlamp is above 850mm from the ground (1.6.3)

Rear position lamp adversely affected by the operation of another lamp (1.1.3b)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)