2008 Suzuki Uh 200 K8

Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b))

Front Brake indicates a slightly grabbing brake (1.2.1 (c))

Front Brake disc contaminated (1.1.14 (b))

Front Brake pad(s) contaminated (1.1.13 (b))

Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Brake disc fractured (1.1.14 (a) (ii)) DANGEROUS

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Fork yoke deformed but serviceable (2.2.2 (d) (i))

Front Brake binding but not excessively (1.2.1 (f))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Forks slightly corroded Rust spots but not leaking (2.2.2 (d) (i))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii)) DANGEROUS

Headlamp aim too low (1.6)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

front forks rusted above seal line/rear tyre has cut in tread but not to cords/headlamp set on lowest setting