2008 Honda Cb 600 FA-8

Front Brake lever is so short that the brake cannot be readily applied (1.1.2 (d))

Nearside Rear All direction indicators not working (4.4.1 (a) (ii))

Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Shock absorber has a serious fluid leak (5.3.2 (b))

Headlamp switch does not immediately illuminate all main beam headlamps (4.1.3 (a))

Rear Brake component slightly loose (1.1.21 (c))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Clutch lever bent (6.2.7 (b))

Drive chain slightly loose (6.1.7 (c) (i))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Clutch lever bent (6.2.7 (b))

Drive chain slightly loose (6.1.7 (c) (i))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Riders seat insecure (6.2.5 (a) (ii)) DANGEROUS

Clutch lever bent (6.2.7 (b))

Drive chain slightly loose (6.1.7 (c) (i))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Steering movement slightly 'notchy' (2.2.1a)

Brake pedal is bent but brake can still be readily applied (3.1.3c)

Clutch lever bent (6.2.1g)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Brake lever is bent and the brake cannot be readily applied (3.1.3c)

Brake pedal is bent but brake can still be readily applied (3.1.3c)

Clutch lever bent (6.2.1g)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Drive chain worn but not considered excessive (6.2.1e)

Rear Brake pedal is bent and the brake cannot be readily applied (3.1.3c)

Drive chain worn but not considered excessive (6.2.1e)

Chain guard is missing.

Steering movement slightly 'notchy' (2.2.1b)

Drive chain excessively loose (6.2.1d)

Front Roller brake test indicates a binding brake (3.3.A1a)

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Chain guard is missing.

Steering movement slightly 'notchy' (2.2.1b)

Chain guard missing

slight binding of front brake when pushed but rbt ok

Front Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Chain guard missing

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Drive chain slightly tight (6.2.1d)