2002 Ktm 400EXC

Rear shock absorber has a light misting (2.4.A.1c)

Steering movement slightly stiff (2.2.1b)

Nearside Rear wheel bearings have slight free play (2.4.A.2c)

advise slight movement on front caliper slider pins

Advise new no plate

Brake lever pivots slightly worn (3.1.3a)

Front Wheel spoke slightly corroded. (4.2.1b)

Steering movement slightly stiff (2.2.1b)

Chain guard missing

Rear Brake hose slightly kinked (3.2.B3a)

Rear suspension bearing has slight free play (2.4.A2a(i))

Rear wheel bearings have slight free play (2.4.A.2c)

Exhaust noisy (7.1.2)

Rear position lamp incorrect colour (1.1.2b)

Rear reflector on motorcycle missing (1.4.1)

Registration plate with character(s) which are not the correct height (6.3.4a)

Registration plate with character(s) which are not the correct width (6.3.4a)

Exhaust noisy (7.1.2)

Headlamp masks/converters fitted

Headlamp aim beam image kick up to the offside (1.6)

Headlamp aim too high (1.6)

Headlamp masks/converters fitted

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear position lamp incorrect colour (1.1.2b)

Rear reflector on motorcycle missing (1.4.1)

Registration plate missing (6.3.1a)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Exhaust noisy (7.1.2)

Front shock absorber has light misting of stanchion (2.3.3)

Headlamp aim beam image kick-up is to the offside (1.6.1)

Headlamp aim too high when the centre of the headlamp is above 850mm from the ground (1.6.3)

Number plate undersize.

Rear position lamp incorrect colour (1.1.2b)

Rear reflector on motorcycle missing (1.4.1)

headlamp masks/converters fitted

Exhaust noisy (7.1.2)

Front shock absorber has light misting of stanchion (2.3.3)

Number plate undersize.

headlamp masks/converters fitted