2004 Honda Cbr 600 F-4

Exhaust noisy (7.1.2)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Drive chain excessively loose (6.2.1d)

Nearside Rear Direction indicator insecure (1.5.3b)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Headlamp aim too low (1.6)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

offside front brake pad plate loose

Nearside Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Offside Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Drive chain worn but not considered excessive (6.2.1e)

Rear Drive chain sprocket slightly worn (6.2.1e)

Front Steering headbearing has slight free play (2.2.2)

Front Brake lever is bent and the brake cannot be readily applied (3.1.3c)

Front Clutch lever bent so it cannot be readily operated. (6.2.1g)

Front Steering headbearing has excessive free play (2.2.2)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Brake pedal is bent and the brake cannot be readily applied (3.1.3c)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Brake disc(s) excessively scored (3.2.A1l)

Rear Brake disc(s) excessively worn (3.2.A1l)

Riders seat insecure (6.2.1a)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Nail in rear tyre

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Front Steering headbearing has excessive free play (2.2.2)

Rear Brake pedal is bent and the brake cannot be readily applied (3.1.3c)