1993 Yamaha Diversion

Front Valve stem slightly damaged (5.2.3 (j))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Valve stem slightly damaged (5.2.3 (j))

Fork covers fitted, fork seals potentially leaking

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Fork covers fitted, fork seals potentially leaking

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Position lamp not working (4.2.1 (a))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Drive chain slightly tight (6.1.7 (k) (i))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Killswitch inoperative

Nearside mirror removed prior to test

Rear Position lamp not working (4.2.1 (a))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Rear Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii)) DANGEROUS

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Killswitch inoperative

Nearside mirror removed prior to test

FRONT WHEEL BEARING SOUNDS ROUGH

Stop lamp remains on when the brakes are released (4.3.2 (a) (iii))

Front Roller brake test indicates a binding brake (3.3.A1a) DANGEROUS

Rear wheel bearings have excessive free play (2.4.A.2c) DANGEROUS

both tyre treads on limit

REAR BRAKE PADS LOW

exhaust has been repaired

Headlamp aim too low (1.6)

Headlamp aim too low (1.6)

Rear Roller brake test indicates a sticking brake (3.3.A1a)

Offside Rear Upper Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))