1994 Yamaha Tdm

Rear Brake hose slightly damaged (1.1.12 (b) (i))

Front Position lamp not working (4.2.1 (a))

Offside Front Direction indicator likely to become detached (4.4.1 (c) (ii))

Offside Front Direction indicator not working (4.4.1 (a) (ii))

Rear Brake lagging in operation (1.2.1 (d))

Rear Brake pedal has insufficient reserve travel (1.1.2 (a))

Rear Stop lamp not working (4.3.1 (a) (ii))

Rear Brake hose slightly damaged (1.1.12 (b) (i))

Rear suspension slightly stiff indicating a bearing or bush beggining to seize up.

Steering movement slightly stiff (2.2.1a)

Steering movement slightly stiff (2.2.1b)

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Rear suspension slightly stiff indicating a bearing or bush beggining to seize up.

Steering movement slightly stiff (2.2.1a)

Steering movement slightly stiff (2.2.1b)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Speedo drive located incorrectly

Drive chain excessively loose (6.2.1d)

Drive chain sprocket carrier worn to excess (6.2.1e)

Rear wheel bearings have excessive free play (2.4.A.2c)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Speedo drive located incorrectly

Lower Rear mono-shock pivot worn but not excessive (2.4.B.4)

Offside Rear Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Roller brake test Higher brake efficiency normally obtainable. (3.3.A2a)

Lower Rear mono-shock pivot worn but not excessive (2.4.B.4)

Offside Rear Exhaust is leaking but is not excessively noisey (7.1.1b)

Roller brake test Higher brake efficiency normally obtainable. (3.3.A2a)

Rear Tyre worn close to the legal limit (4.1.3(ii))

fork seals weaping