1994 Honda VT1100

Brake performance unable to be tested (1.2.1 (g))

Handlebar retaining device loose (2.2.1 (b) (i))

Headlamp aim projected beam image obviously incorrect (4.1.2 (c))

Rear Registration plate does not conform to the specified requirements (0.1 (d))

Wheel alignment incorrect which adversely affects the handling (2.4 (a))

Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front master cylinder corroded

Rear tyre outer wall damaged

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Nearside Rear Shock absorber insecurely attached (5.3.2 (a) (i))

Steering operation linkage fouling when handlebars turned from lock to lock speedo cable (2.1.4 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Brake indicates a slightly grabbing brake (1.2.1 (c))

Exhaust noisy (7.1.2)

Front Brake disc(s) cracked (3.2.A1g)

Locking devices not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))